Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-25-2021, 07:38 PM   #21
Ol' Ron
Senior Member
 
Ol' Ron's Avatar
 
Join Date: May 2010
Location: Chester Vt
Posts: 8,843
Default Re: What hub/drum assy do I have here?

I'm looking for a set of front drums 40/48. Don't care if they are oversize, I just want the hubs
Gramps
Ol' Ron is offline   Reply With Quote
Old 02-26-2021, 12:45 PM   #22
Baggs
Member
 
Join Date: Dec 2018
Location: Oakdale, Ca
Posts: 44
Default Re: What hub/drum assy do I have here?

Quote:
Originally Posted by Ggmac View Post
Where do you live ?
Sorry, I thought I did have my location listed. I’ll figure that out in a bit. I’m in Oakdale, Ca.

Regards
Baggs is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-26-2021, 12:51 PM   #23
Baggs
Member
 
Join Date: Dec 2018
Location: Oakdale, Ca
Posts: 44
Default Re: What hub/drum assy do I have here?

Quote:
Originally Posted by Mart View Post
It's what I'd call a "40" hub. Drum fits over the hub. (Hub is on the inside).

Brakes are 12x1.75"

Later had the hub on the outside but off the top of my head I'm not sure where the switch point is.

As a point of interest, the hubs/drums as an assembly are interchangeable for any year 1939 to 1948

Mart.
I had heard that, but was also told at one time the drum/hub needed to also match the backing plate aNd brakes as well?

Last edited by Baggs; 02-26-2021 at 01:40 PM. Reason: Adding
Baggs is offline   Reply With Quote
Old 02-26-2021, 01:43 PM   #24
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: What hub/drum assy do I have here?

Quote:
Originally Posted by Baggs View Post
I had heard that, but was also told at one time the drum/hub needed to also match the backing plate as well?

You can use ANY hydraulic (Lockheed) Ford backing plate from 1939 thru 1948 along with ANY 1937 thru 1948 Ford 12" brake drum/hub assembly.

1937-'39 drums are of the wide-five (10-1/4") bolt pattern.

1940-'41 drum/hubs have the hub flange INSIDE the drum.

1942-'48 drum/hubs have the hub flange on the outside of the drum. DD
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 02-26-2021, 03:18 PM   #25
Baggs
Member
 
Join Date: Dec 2018
Location: Oakdale, Ca
Posts: 44
Default Re: What hub/drum assy do I have here?

Thanks!
Baggs is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:26 AM.