|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-02-2018, 06:59 PM | #1 |
Senior Member
Join Date: May 2010
Location: East Texas
Posts: 146
|
FSI electronic ign on model a
What degrees do you see the timing on an FSI electronic ignition?
|
10-03-2018, 08:51 AM | #2 |
Senior Member
Join Date: Jan 2016
Posts: 2,094
|
Re: FSI electronic ign on model a
The electronic does not change the way it is timed.
So, it gets timed the same way with the pin, or light or nurex wrench for TDC |
Sponsored Links (Register now to hide all advertisements) |
|
10-03-2018, 02:15 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern Upstate New York
Posts: 1,160
|
Re: FSI electronic ign on model a
I time my truck with a timing light at 2 1/2 degrees BTC. The distributor is limited to 20 degrees of total advance because of my Brumfield 5.9 head.
__________________
AL in NY |
10-03-2018, 03:10 PM | #4 |
Senior Member
Join Date: Jan 2015
Location: New York
Posts: 943
|
Re: FSI electronic ign on model a
My rebuilder did work to my FS, he said not to exceed 26 degrees of total advance.
|
10-04-2018, 05:34 PM | #5 |
Senior Member
Join Date: Jan 2016
Posts: 2,094
|
Re: FSI electronic ign on model a
Sponsored Links (Register now to hide all advertisements)
What AL and 1929 are saying is correct for a HC head. If you have a standard head as the pin goes in you want TDC and the rotor pointing to #1. As in the photo. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|