|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-04-2019, 11:16 PM | #21 |
Senior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,687
|
Re: 37 V8 - Thermostat anchor??
If you look close to mine you'll see a zip tie, just chokes the hose, I had [and still do] it like that for some time but use the wire method too.
__________________
"Came too close to dying to stop living now!" |
02-04-2019, 11:30 PM | #22 | |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: 37 V8 - Thermostat anchor??
Quote:
Pretty low tech good solution. I believe an Old henry post. he always had a way to get it done. Traveled a lot and did some questionable fixes. This was not one of them. He is mia now. Flying RV planes now to my knowledge. Last edited by Tinker; 02-04-2019 at 11:43 PM. |
|
Sponsored Links (Register now to hide all advertisements) |
|
02-05-2019, 10:04 PM | #23 |
Senior Member
Join Date: Dec 2010
Location: Redlands, CA
Posts: 148
|
Re: 37 V8 - Thermostat anchor??
Delete.
__________________
Ignorance of the laws of physics does not mean they do not apply to you. Last edited by 29AVEE8; 02-05-2019 at 10:19 PM. |
02-05-2019, 10:50 PM | #24 |
Senior Member
Join Date: Dec 2015
Posts: 287
|
Re: 37 V8 - Thermostat anchor??
The wire method works well. I have used it for years.
|
02-06-2019, 09:51 AM | #25 |
Junior Member
Join Date: May 2010
Location: Gary Troxel, Mount Vernon, WA
Posts: 17
|
Re: 37 V8 - Thermostat anchor??
That style was only on Carriers.
|
02-07-2019, 05:33 PM | #26 |
Junior Member
Join Date: Oct 2017
Location: Long Beach, CA
Posts: 19
|
Re: 37 V8 - Thermostat anchor??
Sponsored Links (Register now to hide all advertisements)
|
02-07-2019, 05:39 PM | #27 |
Senior Member
Join Date: May 2015
Posts: 8,144
|
Re: 37 V8 - Thermostat anchor??
You could also try one of these > https://www.jegs.com/i/JEGS/555/53260K1/10002/-1
View All JEGS In-Line Thermostat Housing JEGS In-Line Thermostat Housing Kit with 180 Degree Thermostat Part Number: 555-53260K1 $28.97 In-Line Thermostat Housing Kit Includes:(1) In-Line Thermostat Housing 555-53260 (1) 180 Degree Thermostat 555-53221 (2) Hose Clamps 555-16055
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
02-07-2019, 06:07 PM | #28 |
Senior Member
Join Date: May 2010
Posts: 2,173
|
Re: 37 V8 - Thermostat anchor??
supereal>>> secure them with a hose clamp placed around the hose just over the stat>>>
Old Henry>>>hold the stat in place is put a hose clamp above it and crank it down>>> TonyM>>> I think some one on FordBarn suggested using a second clamp to hold the thermostat in place. This is what I did. No more problem.>>> mit31>>>The only thing I can think of is a hose clamp above the stat>>> 8^) Jack E/NJ |
|
|
Sponsored Links (Register now to hide all advertisements) |
|