The Ford Barn

MickyD · 02-24-2021, 08:07 PM

Need a picture of the rear fender support bracket for a 1928 model a roadster. I keep seeing 2 versions one square and one round . I believe the square one is for the front fender and the round one is for the rear fender. I am missing the ones for the rear fenders.

29touring · 02-24-2021, 09:14 PM

1928 should have the forged brackets. Make sure you get the ones for a roadster as the fenders are wider than sedans, phaeton, etc.

29touring · 02-24-2021, 09:19 PM

Sorry I don't think image copied. You can look up forged rear fender brace at Mac's parts to see it.

31Tudor · 02-25-2021, 08:43 AM

Forged is the "round ones" vs. stamped. The fronts were forged as well for your car. The front and rear are the same style. As mentioned, there are two widths of rear brackets, one for roadsters, coupes, pickups (probably some others) and then a shorter width one for sedans.

d.j. moordigian · 02-25-2021, 11:35 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by MickyD

Need a picture of the rear fender support bracket for a 1928 model a roadster. I keep seeing 2 versions one square and one round . I believe the square one is for the front fender and the round one is for the rear fender. I am missing the ones for the rear fenders.

It all depends on the fender "reinforcement" that is welded too the inside of
the fender were the 1/4" carriage bolts go through. Is it a flat plate OR does
it look like a "dog bone" about 2" long..?

Got photos...?

02-24-2021, 08:07 PM	#1
MickyD Senior Member Join Date: Sep 2015 Location: Welcome NC Posts: 207	Rear fender support bracket Need a picture of the rear fender support bracket for a 1928 model a roadster. I keep seeing 2 versions one square and one round . I believe the square one is for the front fender and the round one is for the rear fender. I am missing the ones for the rear fenders. Last edited by MickyD; 02-24-2021 at 08:29 PM.

02-24-2021, 09:14 PM	#2
29touring Junior Member Join Date: Apr 2020 Location: Mid-Michigan Posts: 22	Re: Rear fender support bracket 1928 should have the forged brackets. Make sure you get the ones for a roadster as the fenders are wider than sedans, phaeton, etc.

02-24-2021, 09:19 PM	#3
29touring Junior Member Join Date: Apr 2020 Location: Mid-Michigan Posts: 22	Re: Rear fender support bracket Sorry I don't think image copied. You can look up forged rear fender brace at Mac's parts to see it.

02-25-2021, 08:43 AM	#4
31Tudor Senior Member Join Date: May 2010 Location: North Carolina Posts: 611	Re: Rear fender support bracket Forged is the "round ones" vs. stamped. The fronts were forged as well for your car. The front and rear are the same style. As mentioned, there are two widths of rear brackets, one for roadsters, coupes, pickups (probably some others) and then a shorter width one for sedans.