Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-15-2021, 01:35 PM   #1
HenryCarl
Member
 
Join Date: Oct 2019
Posts: 51
Default no advice needed, but I am curious

After 51 years when I turned my Grandfather's '35 off, my wife's cousin examined it, did some repairs (new spark plugs wires, etc.) distributor cleaning and, of course, a new gas tank, and restarted it. And it had been 25 years before that when it was first turned off.

When we had a celebration of the puff of accumulated exhaust dust and mouse living quarters detritus...before it ran and purred...we decided two or three days later to take turns starting it up with the hand crank.

And three of us did.

I wonder how many can claim that.
HenryCarl is offline   Reply With Quote
Old 05-15-2021, 02:04 PM   #2
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,260
Default Re: no advice needed, but I am curious

I had a '48 Seagrave open cab pumper with the Pierce-Arrow 468 cubic inch flathead V12. I won a lot of beers betting guys I could start it with the crank. It was kind of unfair, because the engine had dual ignitions, and the more cylinders they have (up to a point) the easier they are to crank start. The easiest starting snowmobile I ever had was a 4 cylinder 2 stroke Yamaha. Twice as many firing impulses per revolution than the standard twin cylinder model.
tubman is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-15-2021, 02:28 PM   #3
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: no advice needed, but I am curious

My father taught me when I was about 10 years old how to crank start his former '36 police car.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Old 05-15-2021, 04:54 PM   #4
ursus
Senior Member
 
Join Date: May 2010
Location: Oregon
Posts: 1,369
Default Re: no advice needed, but I am curious

A couple years ago, while stopped at a small market in hardscrabble Eastern Oregon, I watched as a guy walked out with a sixer of beer, opened the door of a 1940's Chevrolet pickup, pulled out a hand crank, and proceeded to crank it started with only one jerk on the handle. He did this with such nonchalance that I assumed this to be normal for a guy that didn't need no stinkin' starter.
ursus is offline   Reply With Quote
Old 05-16-2021, 07:12 AM   #5
mfirth
Senior Member
 
Join Date: Aug 2017
Location: ohio
Posts: 986
Default Re: no advice needed, but I am curious

Fun stuff everyone. I remember my Uncle John crank starting his Case tractor when the battery was too weak to roll it. Fired on the 3rd pull.
mfirth is offline   Reply With Quote
Old 05-16-2021, 07:28 AM   #6
mhsprecher
Senior Member
 
mhsprecher's Avatar
 
Join Date: Aug 2012
Location: Takoma Park, MD
Posts: 2,811
Default Re: no advice needed, but I am curious

Sponsored Links (Register now to hide all advertisements)
Not quite the same, but my 24 Model T had been sitting for 56 years and it started (with the starter). We spent 15 min on it one day, decided to replace the carb and with the replacement carb and about 15 min of trying, it started. I had cleaned and re-gapped the old plugs and cleaned the connections on the old wiring, and replaced the battery cables,but that was about it. And changed the oil. :-)
__________________
1924 Model T Coupe
1928 Model A Roadster
1930 Model A Town Sedan
1939 Deluxe Fordor
1945 pickup
1951 Custom convertible
mhsprecher is offline   Reply With Quote
Old 05-16-2021, 09:19 AM   #7
MGG
Senior Member
 
MGG's Avatar
 
Join Date: Apr 2015
Location: Oregon City, OR
Posts: 285
Default Re: no advice needed, but I am curious

After some effort to finally get my 59A style V-8 running, which had not run in about 25 years, my friend and I wanted to see if it would start by cranking. We were surprised to see how easily it started. To our amazement it took only about 1/4 of a turn and fired right up!
MGG is offline   Reply With Quote
Old 05-16-2021, 09:58 AM   #8
slowforty
Senior Member
 
slowforty's Avatar
 
Join Date: May 2010
Location: Tinley Park Ill
Posts: 1,055
Default Re: no advice needed, but I am curious

When cranking there is no starter taking juice from the ignition. Ignition gets full voltage from the battery
slowforty is offline   Reply With Quote
Old 05-16-2021, 10:24 AM   #9
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: no advice needed, but I am curious

Quote:
Originally Posted by slowforty View Post
When cranking there is no starter taking juice from the ignition. Ignition gets full voltage from the battery
When my father taught me how to crank his car, it was not for the fun of it but because the battery was dead. Was more likely to get full voltage from the generator.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Old 05-16-2021, 02:27 PM   #10
hermitrob
Junior Member
 
hermitrob's Avatar
 
Join Date: Mar 2021
Location: Vermont
Posts: 25
Default Re: no advice needed, but I am curious

I would like to try this but first I need to f nd a crank for my 34 V8
__________________
Pretty don't get you home

I would rather ask a stupid question than do something stupid
hermitrob is offline   Reply With Quote
Old 05-16-2021, 04:04 PM   #11
OldGold360
Senior Member
 
Join Date: Nov 2020
Location: SW WA
Posts: 639
Default Re: no advice needed, but I am curious

I look forward to trying this on my '36 Pickup... I'll have to search the classifieds for a crank starter for sale?
OldGold360 is offline   Reply With Quote
Old 05-16-2021, 07:01 PM   #12
MGG
Senior Member
 
MGG's Avatar
 
Join Date: Apr 2015
Location: Oregon City, OR
Posts: 285
Default Re: no advice needed, but I am curious

I made two cranks out of electrical ground rods. Two 90 degree bends and a drilled hole in the end for a cross pin and you are done. They are just long enough to clear the bumper.

Last edited by MGG; 05-16-2021 at 09:03 PM. Reason: spelling
MGG is offline   Reply With Quote
Old 06-23-2021, 10:08 AM   #13
HenryCarl
Member
 
Join Date: Oct 2019
Posts: 51
Default Re: no advice needed, but I am curious

Thank you ALL for your memories. It's good to know that my iron jumper cable is in my trunk.
HenryCarl is offline   Reply With Quote
Old 06-23-2021, 12:45 PM   #14
CHuDWah
Senior Member
 
CHuDWah's Avatar
 
Join Date: Dec 2010
Location: Kritter Krick, Flaw-duh
Posts: 1,158
Default Re: no advice needed, but I am curious

I'm late to the party, but...

My Dad and I restored a Model A, our first old car and our first restoration. When we tried to start the newly rebuilt engine, the first crank pull did nothing - a little fiddling with the carb and ignition, another pull and she started right up. Course we both had huge grins on our faces.

One winter, it got cold enough overnight that my parents' modern rides wouldn't start. We got the Model A (a different one than mentioned above) started with the crank, so we at least had transportation that day.

Yeah, I've cranked a few.
CHuDWah is offline   Reply With Quote
Old 06-23-2021, 02:53 PM   #15
pistonbroke
Senior Member
 
Join Date: Feb 2021
Location: Perry Mo.
Posts: 457
Default Re: no advice needed, but I am curious

I had a 36 dodge pickup it wouldn't start below 10 degrees. I would pour a milk jug of hot water over the intake and hand crank it. One maybe two at the most turns at the most.That was the fun part the not so fun part was the truck didn't com with a heater.
pistonbroke is offline   Reply With Quote
Old 06-23-2021, 03:33 PM   #16
Wayne Schuenke
Member
 
Join Date: Mar 2020
Location: Darien wi
Posts: 45
Default Re: no advice needed, but I am curious

I had a 1950 dodge pickup that I would hand crank got lots of weird looks
Wayne Schuenke is offline   Reply With Quote
Old 06-23-2021, 07:13 PM   #17
50fordcoupeman
Senior Member
 
50fordcoupeman's Avatar
 
Join Date: Mar 2016
Location: LaGrande Oregon
Posts: 865
Talking Re: no advice needed, but I am curious

Quote:
Originally Posted by ursus View Post
A couple years ago, while stopped at a small market in hardscrabble Eastern Oregon, I watched as a guy walked out with a sixer of beer, opened the door of a 1940's Chevrolet pickup, pulled out a hand crank, and proceeded to crank it started with only one jerk on the handle. He did this with such nonchalance that I assumed this to be normal for a guy that didn't need no stinkin' starter.
URSUS.............where exactly is hardscrabble Eastern Oregon? Chances are I have been there?
50fordcoupeman is offline   Reply With Quote
Old 06-23-2021, 07:52 PM   #18
Reds34
Senior Member
 
Join Date: Jun 2010
Location: Eastern, CT
Posts: 527
Default Re: no advice needed, but I am curious

I've hand started a Case tractor on a few occasions before. I've also used a crank on my fathers Model A. I've never actually started a V8 flathead with a crank though.

Red
Reds34 is offline   Reply With Quote
Old 06-23-2021, 08:04 PM   #19
ursus
Senior Member
 
Join Date: May 2010
Location: Oregon
Posts: 1,369
Default Re: no advice needed, but I am curious

Quote:
Originally Posted by 50fordcoupeman View Post
URSUS.............where exactly is hardscrabble Eastern Oregon? Chances are I have been there?
That was Adel, Oregon, although the hardscrabble zone covers a pretty big chunk of that region.
ursus is offline   Reply With Quote
Old 06-23-2021, 08:06 PM   #20
slowforty
Senior Member
 
slowforty's Avatar
 
Join Date: May 2010
Location: Tinley Park Ill
Posts: 1,055
Default Re: no advice needed, but I am curious

Better yet . we has a 350ft long driveway with a decent slope. You could give the car a slight push, jump in, pop the clutch and away you go.

My uncle had a bulldozer with a 100ft winch. Hook up the winch start the Dozer and run to the car and pop the clutch. One day he fell running back to the Dozer . It was not a pretty sight
slowforty is offline   Reply With Quote
Old 06-23-2021, 11:44 PM   #21
Lanny
Senior Member
 
Lanny's Avatar
 
Join Date: May 2010
Location: Mn
Posts: 2,403
Default Re: no advice needed, but I am curious

Sorry to change the subject of crank starting, This is unusual,
I have seen, in person, a couple old farm tractors, that are
started with ONE shotgun shell.
Below is a link to an old airplane, that is started by ONE Shell.

https://www.youtube.com/watch?v=65qrzgbTTcQ




.
__________________
My Wife Says That I Never Listen to Her,
I Think That's What She Said


If mama ain't happy, ain't nobody happy.
But if daddy ain't happy...RUN
Lanny is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:31 AM.