Drag link hitting radius rod
Hello from ct. After installing the front axle and hooking up the tie rod and drag link on my 36 pickup, I noticed that the drag link rod end was hitting the drivers side radius rod. This end is hooked up to the pitman arm. It hits square in the middle of the rod. I should mention that the drag link is after market and is straight. The link that I removed from the truck had many weld repairs and was in bad shape. I think my pitman arm is the right one as for length. Any thoughts? Thanks, sk
Last edited by Bbhf; 11-27-2017 at 07:24 PM.
|