1935-1936 Ford axle, wishbone, perch pins and hydraulic brakes

[Chris]

I just tore the front end apart tonight to get the spindles. I do not need the rest. It was a nice front end out of a 1936 Ford that has been sitting since the 70's. I have a very nice strait 35-36 wishbone, nice strait 33-36 axle, super nice perch pins with excellent threads and nuts, a pair of 1939-1941 front backing plates, and a pair of front drums and bearings. I can deliver any of this to the puyallup swap meet Feb 18th. I also have a nice 35-36 rear end complete less brakes I will sell for 250.00






If I split this stuff up, heres the list

Axle- super strait, nice holes. Great core to drop- 100.00 SOLD PENDING PAYMENT




Wishbone- nice and strait, these work really good to split as they have clearance for the tie rod going under the bone- 125.00 WILL NOT SHIP UNLESS I SPLIT IT





Perch pins- super nice, threads are very nice and nuts spin nice and smooth up and down em. 80.00




Drums/backing plates. Drums are nice cores, will need to be turned. One is an early drum with the hub mounted inside, the other the hub mounts on the outside. I MAY be able to set you up with a matched set if your picky. Lug stud threads good
The backing plates are nice and not pitted. Missing shoes, spring and lower anchors. I have springs, and the shoes/anchors you can buy new. Asking 200.00 for all brake parts

[Chris]

btt

[Chris]

BtT

[rattlesnakehoey]

hi Chris gotta get my coupe ready for the wedding, I am chasing a set of 1935 front shocks & levers. Do you have any?

[Chris]

Brakes and axle sold, have perch pins and wishbone left. Last call if you want them delivered to the swap meet saturday

[Chris]

Sponsored Links (Register now to hide all advertisements)

all sold

[aandkt]

Anyone have a set of brake drums and hubs for my 1939 ford??
Thanks