|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
11-22-2019, 05:21 PM | #1 |
Member
Join Date: Sep 2013
Location: Austin TX
Posts: 81
|
Help in identifying some early V8 parts
I acquired these as part of a pile o' parts deal and was hoping that someone on here with smarts can tell me what model year these are from. Thanks in advance.
|
11-23-2019, 11:54 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 1,646
|
Re: Help in identifying some early V8 parts
The steering column bracket with the switch appears 1940-47 pickup
|
Sponsored Links (Register now to hide all advertisements) |
|
11-24-2019, 01:23 AM | #3 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,307
|
Re: Help in identifying some early V8 parts
The other steering column bracket below it is '40 pass car
|
11-24-2019, 12:08 PM | #4 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: Help in identifying some early V8 parts
The one with the switch looks exactly like my 39 picup column drop
|
11-24-2019, 04:50 PM | #5 |
Member
Join Date: Sep 2013
Location: Austin TX
Posts: 81
|
Re: Help in identifying some early V8 parts
Thanks gentlemen ! I appreciate it.
|
11-24-2019, 05:04 PM | #6 |
Member
Join Date: Sep 2013
Location: Austin TX
Posts: 81
|
Re: Help in identifying some early V8 parts
Sponsored Links (Register now to hide all advertisements)
|
11-24-2019, 09:44 PM | #7 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: Help in identifying some early V8 parts
The squared off u-bolt with the nipple on the inside of the U is for a '32-'34 rear spring.
|
11-25-2019, 08:59 PM | #8 |
Member
Join Date: Sep 2013
Location: Austin TX
Posts: 81
|
Re: Help in identifying some early V8 parts
|
11-25-2019, 10:31 PM | #9 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Help in identifying some early V8 parts
The one on the u-bolt is on upside down if you are interested in that.
|
11-25-2019, 10:34 PM | #10 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: Help in identifying some early V8 parts
The flat piece with the oval hole in the center and four round holes on the corners fits under the front spring on 1932-34 Fords and is used in conjunction with the two rounded U-bolts. Yes, two of the squared-off U-bolts are required for the rear spring.
|
11-25-2019, 11:58 PM | #11 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,577
|
Re: Help in identifying some early V8 parts
the oval hole is for the rubber bumper stopper thing to mount in
|
12-01-2019, 11:07 AM | #12 |
Member
Join Date: Sep 2013
Location: Austin TX
Posts: 81
|
Re: Help in identifying some early V8 parts
Many thanks ! Are the 2 'squared' u-bolts for '32-'34 as well?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|