|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-20-2011, 12:04 PM | #1 |
Member
Join Date: Jun 2010
Location: Calgary Alberta Canada
Posts: 71
|
Seeking Info on Welting under Visor on 30 Tudor
Hello A Gang, The JS says precious little about the welting found under the visor on the closed cars, only that all closed cars with painted visors had one, and that it was painted the upper body color ( Page 13-8). There is no mention of diameter, or material, etc. I think it was made with left over roof rubber,originally, being about 1/2 inch in diameter...I am curious if more info been found about this in recent years? Thanks as always for your kind advise! Kev
|
07-20-2011, 01:00 PM | #2 |
Senior Member
Join Date: May 2010
Location: Newnan, GA
Posts: 106
|
Re: Seeking Info on Welting under Visor on 30 Tudor
Kev, On a '30 Tudor the welting that goes between the header cover and header, that butts up against the visor is the same as the fender welting. A smaller welting (3/16" dia) is used for the gas tank and where the front fender attaches at the spalsh apron and running board.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-20-2011, 01:25 PM | #3 |
Senior Member
Join Date: May 2010
Location: AZ and WA
Posts: 764
|
Re: Seeking Info on Welting under Visor on 30 Tudor
I've been wondering the same thing. The only reference to this feature are two sentences in the last paragraph Area 13. Very vague. Since it's painted it would be difficult to add it after the fact. It's missing on my truck and the judges caught it in San Diego.
|
07-21-2011, 04:37 PM | #4 |
Member
Join Date: Jun 2010
Location: Calgary Alberta Canada
Posts: 71
|
Re: Seeking Info on Welting under Visor on 30 Tudor
Thanks lot guys, I'm pretty sure its a bigger diameter but I'll keep hunting around online, maybe I can find more info, Thanks ,Kev
|
07-21-2011, 04:48 PM | #5 |
Registered User
Join Date: May 2010
Location: Sacramento Ca
Posts: 1,179
|
Re: Seeking Info on Welting under Visor on 30 Tudor
heres a picture of an orignal car (Dougs), i didnt measure it
there MUST be some original cars and owners out there tom |
07-22-2011, 10:48 AM | #6 |
Member
Join Date: Jun 2010
Location: Calgary Alberta Canada
Posts: 71
|
Re: Seeking Info on Welting under Visor on 30 Tudor
Sponsored Links (Register now to hide all advertisements)
|
07-04-2014, 02:37 PM | #7 |
Senior Member
Join Date: Nov 2011
Location: Connecticut
Posts: 204
|
Re: Seeking Info on Welting under Visor on 30 Tudor
Is this welting sandwiched between the wooden header and the front header cover, or is it sandwiched between the header and the visor ?
Tommy- |
07-04-2014, 03:43 PM | #8 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Seeking Info on Welting under Visor on 30 Tudor
the wooden header and the header cover
|
07-06-2014, 08:22 AM | #9 |
Senior Member
Join Date: Nov 2011
Location: Connecticut
Posts: 204
|
Re: Seeking Info on Welting under Visor on 30 Tudor
Thanks Mitch.
Tommy- |
|
|
Sponsored Links (Register now to hide all advertisements) |
|