|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-03-2018, 06:11 PM | #1 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 239
|
Assembly of pitman are to drag link
i have never done this before. Does the ball of the pitman arm go into the slot on the drag link the put the ball caps, spring and end plug in. Or do the ball caps and spring go in before the pitman arm ball is inserted. I have looked at the Les Andrews book, but I am confused about the order of the assembly.
Thanks for your help. Ken |
06-03-2018, 06:17 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 239
|
Re: Assembly of pitman are to drag link
Looking at the assembly instructions on Snyder's web site, it looks like one ball cap goes in, then the pitman arm, then the other ball cap, spring and end plug. Can anyone confirm this please?
Thanks again. Ken |
Sponsored Links (Register now to hide all advertisements) |
|
06-03-2018, 06:18 PM | #3 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Assembly of pitman are to drag link
Makes sense.
Paul in CT |
06-03-2018, 07:38 PM | #4 |
Junior Member
Join Date: Jan 2018
Location: Alabama
Posts: 28
|
Re: Assembly of pitman are to drag link
That's how I did it.... I also had to hold the joint together tightly to get the threaded plug started.
Randall Last edited by Josh Randall; 06-03-2018 at 07:50 PM. |
06-03-2018, 08:46 PM | #5 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
|
Re: Assembly of pitman are to drag link
Sponsored Links (Register now to hide all advertisements)
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club Last edited by CarlG; 06-03-2018 at 08:55 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|