The Ford Barn

KMeredith87 · 09-02-2016, 04:25 PM

Was wondering if anyone has some information about the Malory distributors. I currently run one of Bubba's magnificent distributors and I know it's supposed to have a full 30 degrees of advance at about 2500 rpm. Shot it with the timing light and that seems to be acurate. However, I was also checking the dwell angle and advance at idle and that's where my questions reside. I may have done it wrong but I was reading 90 degrees dwell and 10 degrees advance at about 430 rpm. Anyone out there know what the actual dwell angle should be for one of these and or if I'm at the right advance at that idle? Any advice is appreciated!

09-02-2016, 04:25 PM	#1
KMeredith87 Senior Member Join Date: Mar 2013 Location: San Antonio Posts: 177	Mallory dwell angle? Was wondering if anyone has some information about the Malory distributors. I currently run one of Bubba's magnificent distributors and I know it's supposed to have a full 30 degrees of advance at about 2500 rpm. Shot it with the timing light and that seems to be acurate. However, I was also checking the dwell angle and advance at idle and that's where my questions reside. I may have done it wrong but I was reading 90 degrees dwell and 10 degrees advance at about 430 rpm. Anyone out there know what the actual dwell angle should be for one of these and or if I'm at the right advance at that idle? Any advice is appreciated!