The Ford Barn

maako · 01-01-2015, 03:30 AM

need help to ID brakes please see pictures anything will help.

Rowdy · 01-01-2015, 08:08 AM

Possibly Studebaker. Maybe someone on the AACA will know for sure. Rod

juke joint johnny · 01-01-2015, 01:19 PM

Those front backing plates look like upside down Model A ones with a wheel cylinder put in it.

Might be easier to start over with a new system .Most people use 40-48 Ford brakes for Hydraulics
If it were mine I would put the Rod brake system back on it . You often see them advertised on the Ford Barn Swap Section.
I'm sure smarter people than me will chip in with good ideas .

John Cochran

Bob C · 01-01-2015, 02:23 PM

Sponsored Links (Register now to hide all advertisements)

The master cylinder looks like 60-63 Chevy 1/2 ton pickup.

Bob

01-01-2015, 08:08 AM	#2
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: help to ID brakes Possibly Studebaker. Maybe someone on the AACA will know for sure. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

01-01-2015, 01:19 PM	#3
juke joint johnny Senior Member Join Date: Feb 2012 Location: London England Posts: 908	Re: help to ID brakes Those front backing plates look like upside down Model A ones with a wheel cylinder put in it. Might be easier to start over with a new system .Most people use 40-48 Ford brakes for Hydraulics If it were mine I would put the Rod brake system back on it . You often see them advertised on the Ford Barn Swap Section. I'm sure smarter people than me will chip in with good ideas . John Cochran