31ford front brake

[Bigjohnson]

Does anyone have a picture of the front brake rod spring mount thanks fellas

[CA Victoria]

The long anti-rattle spring is used up front, the bracket is stamped steel and on mine is riveted to the frame. It attaches with a 5/16-24 x 1” bolt to the bracket.
The knob goes ahead of the spring so tension holds the rod forward and eliminates “rattle”.
April 31 frame pictured.

[DavidG]

Per chance did you mean '32 rather than '31, given which site you're on? If so, the spring wire front brake rod supports used for most of the '32 model year are completely different from those used on Model As.

[V8COOPMAN]

Originally Posted by DavidG

Per chance did you mean '32 rather than '31, given which site you're on? If so, the spring wire front brake rod supports used for most of the '32 model year are completely different from those used on Model As.

"Big..." DOES own a '31 coupe. DD

[Bigjohnson]

Sorry I am so used to going on early v8 I was talking about my 31did post on model a forum so sorry guys

[Bigjohnson]

Sponsored Links (Register now to hide all advertisements)

Thanks that is what I needed to see learn as I go thanks agin