The Ford Barn

Trekemeyer · 06-21-2019, 03:36 PM

Was wondering if what exhaust manifolds will fit my 38 pickup with a1950 flathead motor stock style or headers thanks Tom

Stenny · 06-21-2019, 05:05 PM

The easiest is to use those that were stock on your '38 thru 59 series engine. Clears the steering box and you can run duals or stock. You can use the 8BA manifolds but with the front crossover this complicates things.

Trekemeyer · 06-21-2019, 07:24 PM

Will car manifold work on my 38 ford pickup or pickup manifold works only

TJ · 06-22-2019, 03:00 PM

Car manifolds will work.

Ol' Ron · 06-23-2019, 02:47 PM

Sponsored Links (Register now to hide all advertisements)

Looking for a dash window molding for a 38 PU for a friend.

06-21-2019, 03:36 PM	#1
Trekemeyer Senior Member Join Date: Feb 2018 Posts: 133	38 ford pickup Was wondering if what exhaust manifolds will fit my 38 pickup with a1950 flathead motor stock style or headers thanks Tom

06-21-2019, 05:05 PM	#2
Stenny Member Join Date: Feb 2011 Posts: 58	Re: 38 ford pickup The easiest is to use those that were stock on your '38 thru 59 series engine. Clears the steering box and you can run duals or stock. You can use the 8BA manifolds but with the front crossover this complicates things.

06-21-2019, 07:24 PM	#3
Trekemeyer Senior Member Join Date: Feb 2018 Posts: 133	Re: 38 ford pickup Will car manifold work on my 38 ford pickup or pickup manifold works only

06-22-2019, 03:00 PM	#4
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 4,708	Re: 38 ford pickup Car manifolds will work.

06-23-2019, 02:47 PM	#5
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 7,740	Re: 38 ford pickup Sponsored Links (Register now to hide all advertisements) Looking for a dash window molding for a 38 PU for a friend.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode