Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-25-2019, 09:49 AM   #1
mcgarrett
Senior Member
 
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 940
Default Converting 1940 Ford backing plates to self-energizing brakes

Checking around to see if anyone has ever tried to convert 1940 Ford Lockheed style brake backing plates to the Bendix style self-energizing brake setup. I know there are kits available from Speedway, but they're a bit pricey. There are some modification/fabrication work to be done to make the hardware work, but I wanted to know if anyone has tried to do it and how well did it work. If I don't get any responses, I'm going to try it anyway and see how it goes.
Thanks for any and all feedback.
mcgarrett is offline   Reply With Quote
Old 07-25-2019, 10:00 AM   #2
svm99
Senior Member
 
Join Date: May 2010
Location: Garlic Country of CA
Posts: 537
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

Yes there is a guy in Dallas, Brian Bass of Bass Custom. He has done numerous sets for customers, excellent quality work.

Good luck with it, Paul J.
svm99 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-25-2019, 10:00 AM   #3
Russ/40
Senior Member
 
Russ/40's Avatar
 
Join Date: May 2010
Location: Santee, California
Posts: 3,505
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

It's been done, but requires heroic measures. I can't recall who did it, but in my opinion not worth the effort.
Russ/40 is offline   Reply With Quote
Old 07-25-2019, 10:48 AM   #4
philipswanson
Senior Member
 
Join Date: Oct 2015
Location: Bonita, CA
Posts: 1,374
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

Converted to Lincolns on the front only. Not hard at all. Buy the kit and don't go cheap on this one or not at all. I also got mine at Speedway which ended up cheaper than the guy in CA because I saved the taxes and got free shipping. Well worth it.
philipswanson is offline   Reply With Quote
Old 07-25-2019, 11:51 AM   #5
drolston
Senior Member
 
drolston's Avatar
 
Join Date: Jun 2014
Location: Williamsburg, VA
Posts: 1,622
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

At about $400, the M/T kit for the front brakes is way worth it. I kept Lockheed brakes on the rear of my '41, and get good stopping power.
drolston is offline   Reply With Quote
Old 07-25-2019, 12:34 PM   #6
51woodie
Senior Member
 
51woodie's Avatar
 
Join Date: Apr 2018
Location: Chelmsford, ON Canada
Posts: 524
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

Sponsored Links (Register now to hide all advertisements)
I did front and rear on my '46. I had to do a bit of grinding on the front spindle castings to get the backing plate to seat. Other than that, all went well. The kits are available from Speedway or Boling Brothers. BB has tech info on their site that may help in making your decision.
http://www.bolingbrothers.com/brake-kits-1937-1948/
51woodie is offline   Reply With Quote
Old 07-25-2019, 01:03 PM   #7
rich b
Senior Member
 
rich b's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,813
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

Not rocket science to convert them; but unless you can do the work yourself, the Lincoln repops are probably more economical. If you are going to buy, tough to beat Speedway's deal on the MT brakes.

Of course in some cases, people want to retain the "look" of early Ford brakes.

Others may prefer the appearance of "real" Lincoln brakes as compared to the unaesthetic appearance of the Lincoln repop's backing plate stamping.
Attached Images
File Type: jpg 28-inside (Medium).jpg (49.8 KB, 132 views)
rich b is offline   Reply With Quote
Old 07-25-2019, 04:47 PM   #8
bobH
Senior Member
 
Join Date: May 2010
Location: so cal, placerville, vegas
Posts: 1,394
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

I've seen a writeup on how the guy in Dallas did it. With enough searching, you should be able to find it. For him to do it, it was posted as very pricey. But, if you find the article, there is enough info for DIY. In any event, it's been done, and you should be able to figure it out.
bobH is offline   Reply With Quote
Old 07-25-2019, 04:53 PM   #9
RalphM
Senior Member
 
RalphM's Avatar
 
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,646
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

Fronts, or rears?
If fronts, then why not use F-1, or F-100 brakes? This is what I’m doing on my 35( with 39 suspension).
RalphM is offline   Reply With Quote
Old 07-25-2019, 04:56 PM   #10
Jack E/NJ
Senior Member
 
Jack E/NJ's Avatar
 
Join Date: May 2010
Posts: 2,171
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

Many of us are anxiously waiting for FlatheadTed to get done testing his pre-production Lockheed floater conversions. Jack E/NJ
Jack E/NJ is offline   Reply With Quote
Old 07-25-2019, 05:02 PM   #11
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,768
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

The 42-48 plates are better suited. I did a set way back when. If I did it again, I would use later model wheel cylinders that have the tab that the anchor bolt goes thru. That will set the vertical ind axial relationship to the shoes. It would be wise to use shoes from the same application as the cylinders. That way the shoes and wheel cylinders match.
Attached Images
File Type: jpg 257084-brake.JPG (35.2 KB, 105 views)
File Type: jpg 257228-brake2.JPG (42.8 KB, 101 views)
Andy is offline   Reply With Quote
Old 07-26-2019, 07:57 AM   #12
mcgarrett
Senior Member
 
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 940
Default Re: Converting 1940 Ford backing plates to self-energizing brakes

Hey Rich,
I think you nailed it! Your backing plate modification is exactly what I was looking for. Do you have any more photos or details of how you modified the backing plates and what brake hardware you used? I was hoping to avoid the $1,000 price tag of the Speedway kits. It didn't look like it would be too hard to adapt the stock plates to use the Bendix setup. I wanted to retain the stock look of the factory backing plates while doing away with the hassle of the original brake adjustment.
Thanks for your reply and any other info you might have.
Mike G.
mcgarrett is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:35 PM.