Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-13-2011, 10:57 PM   #1
'29wagon
Senior Member
 
Join Date: May 2010
Location: H.B. California
Posts: 451
Default e break cross shaft grease fitting

who is replacing with what ?
before i put the splash shields back on, maybe i should replace the two grease fittings on the frame.
i did a search on this topic to no avail.
proper way to remove, can i just tap for a small fitting or resize the hole and tap for larger ?
maybe there is a catalog kit.
'29wagon is offline   Reply With Quote
Old 08-14-2011, 08:47 AM   #2
Steve Wastler
Senior Member
 
Steve Wastler's Avatar
 
Join Date: May 2010
Posts: 1,987
Default Re: e break cross shaft grease fitting

The fittings are a press fit, hex sided (if original), if this is on a 28-30 e brake . I usually put a wrench on the fitting get it to turn some and pop it off, a little help with a screwdriver can help. Brattons sells them under grease fittings in the catalog.
Steve Wastler is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-14-2011, 12:10 PM   #3
'29wagon
Senior Member
 
Join Date: May 2010
Location: H.B. California
Posts: 451
Default Re: e break cross shaft grease fitting

thank you steve.
i'll give it a turn . i will be replacing these with a modern . i do see the originals listed in the catalogs .
'29wagon is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:51 AM.