Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-26-2019, 02:56 PM   #1
ursus
Senior Member
 
Join Date: May 2010
Location: Oregon
Posts: 1,113
Default Gas Gauge Gasket

There was a lot of discussion here a while back regarding the use of cork versus neoprene when installing the gas gauge. Many reported leaks developing with the neoprene gasket perhaps due to the crap gas we now have. Some questioned whether some of the gaskets sold were actually made from a material other than neoprene. The consensus was in favor of cork. The cork gasket in my coupe never leaked a drop in 50 years in the family - i only pulled the gauge to replace a soggy float.

I see that Bratton's and other vendors no longer carry the cork gasket, only neoprene and am curious what you folks think about the currently supplied neoprene product.
ursus is offline   Reply With Quote
Old 08-26-2019, 04:04 PM   #2
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,480
Default Re: Gas Gauge Gasket

I will only use cork, so I'd have to keep looking until I found it.
Tom Wesenberg is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-26-2019, 04:08 PM   #3
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 7,000
Default Re: Gas Gauge Gasket

Bert's shows them. https://modelastore.com/fuel-system/...roduct_id=3901


Bob
Bob C is offline   Reply With Quote
Old 08-26-2019, 04:24 PM   #4
barnstuf
Senior Member
 
Join Date: May 2010
Location: Cape Cod MA
Posts: 2,840
Default Re: Gas Gauge Gasket

The very best is cork gaskets used with brass slip ring washers. Both are in Snyder's current catalog.
barnstuf is offline   Reply With Quote
Old 08-26-2019, 04:26 PM   #5
Forddan
Senior Member
 
Join Date: May 2019
Location: Westford, MA
Posts: 173
Default Re: Gas Gauge Gasket

I replaced them recently and all the vendors I checked had cork gaskets for sale.
Forddan is offline   Reply With Quote
Old 08-26-2019, 08:26 PM   #6
TerryO
Senior Member
 
TerryO's Avatar
 
Join Date: May 2010
Location: N. GA
Posts: 316
Default Re: Gas Gauge Gasket

Mikes has the cork gaskets.

https://www.mikes-afordable.com/product/A9321-23.html


TerryO
TerryO is offline   Reply With Quote
Old 08-26-2019, 09:29 PM   #7
Dan Partain
Senior Member
 
Dan Partain's Avatar
 
Join Date: May 2010
Location: Hangtown, CA
Posts: 484
Default Re: Gas Gauge Gasket

I didn't like the fit of the last cork gaskets I bought so I bought some cork gasket material at NAPA and made my own, it was very easy. Also, no situation where shipping is more than the parts cost. -DAN
Dan Partain is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:01 AM.