Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-01-2014, 11:03 AM   #1
Rocketsled
Senior Member
 
Rocketsled's Avatar
 
Join Date: May 2010
Location: Wakefield, N.H. USA
Posts: 142
Default Argentine A

I'm working on a Argentine built '29 Roadster. Is there a RHD
wiring diagram that someone could post?
Thanks,
Rocketsled
Rocketsled is offline   Reply With Quote
Old 09-01-2014, 01:04 PM   #2
john charlton
Senior Member
 
john charlton's Avatar
 
Join Date: May 2010
Posts: 889
Default Re: Argentine A

It is no problem to use the LHD harness . The loom to the head lights and tail lights work just fine as it is easy to "rotate" them to suit. All you have to do is extend the horn wire and the wire to the generator . I make sure I have a good watertight connection and use small cable ties to secure the extended wires to the left hand head lamp loom which runs across under the radiator . If your clips are intact to hold the loom on the rad bottom they work just fine.

John in light rain sunny tommorrow Suffolk County England .
john charlton is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-01-2014, 01:06 PM   #3
john charlton
Senior Member
 
john charlton's Avatar
 
Join Date: May 2010
Posts: 889
Default Re: Argentine A

PS Just use the LHD wiring diagram .

John in same weather Suffolk County England.
john charlton is offline   Reply With Quote
Old 09-01-2014, 02:13 PM   #4
john charlton
Senior Member
 
john charlton's Avatar
 
Join Date: May 2010
Posts: 889
Default Re: Argentine A

OOPS for wire read wires.

John still in Suffolk County England.
john charlton is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:48 PM.