The Ford Barn

Neal · 05-12-2010, 09:55 PM

Quote:

Originally Posted by Dennis Pereira

My last invoice shows I paid $248.45 per Gal for PPG clv rose beige plus hardener at $86.65 a Quart.

I just bought some PPG and it came to about that price, $94 for a quart. I bought a quart of the same color back 3 years ago and it was $56. That is a 67% increase over the past three years.

Neal

Tom from Drippin' · 05-13-2010, 11:47 AM

What's the FIRST thing anyone looking at your car sees?

I, personnaly, have had GREAT results with the PPG Concepts, single stage products. No paint booth, just in my shop. Good compressor and a GOOD GUN........AND Hobby-Air supply for me (VERRY IMPORTANT!).

alpharat · 05-13-2010, 09:44 PM

I just bought PPG DCC at about $100 for a quart. I was going to go w/ a 2 stage on the body and the single stage for engine compartment, but may stick with the single stage for entire thing....

Mike V. Florida · 05-13-2010, 10:42 PM

Add alittle flatner to the pait for the firewall as it was never buffed out and does not have the sheen od the body.

HOTRODPRIMER · 05-14-2010, 07:51 AM

I have experienced excellent results with the Kirker Products,,and they are reasonably priced. HRP

http://www.kirkerautomotive.com/

Aerocraft · 05-14-2010, 12:51 PM

Sponsored Links (Register now to hide all advertisements)

I have used PPG Concept for as long as it has been available and feel it is the best. Their DCC 9300 black is outstanding. Henry's painters would say " HOW DID YOU DO THAT?" Concept is expensive but with the HVLP guns it goes so much further than with my Binks #7 gun. As an alternative to the high prices, check out TCPGlobal.com. They have all the types of paint at lower prices. I have used their paint and it will certainly out last me.

05-13-2010, 11:47 AM	#22
Tom from Drippin' Senior Member Join Date: May 2010 Location: Dripping Springs, Texas Posts: 286	Re: Cost of Paint What's the FIRST thing anyone looking at your car sees? I, personnaly, have had GREAT results with the PPG Concepts, single stage products. No paint booth, just in my shop. Good compressor and a GOOD GUN........AND Hobby-Air supply for me (VERRY IMPORTANT!).

05-13-2010, 09:44 PM	#23
alpharat Junior Member Join Date: May 2010 Location: Texas Posts: 2	Re: Cost of Paint I just bought PPG DCC at about $100 for a quart. I was going to go w/ a 2 stage on the body and the single stage for engine compartment, but may stick with the single stage for entire thing....

05-13-2010, 10:42 PM	#24
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Cost of Paint Add alittle flatner to the pait for the firewall as it was never buffed out and does not have the sheen od the body. __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II

05-14-2010, 07:51 AM	#25
HOTRODPRIMER Senior Member Join Date: May 2010 Location: Upstate,South Carolina Posts: 500	Re: Cost of Paint I have experienced excellent results with the Kirker Products,,and they are reasonably priced. HRP http://www.kirkerautomotive.com/ __________________ ‘When one door closes, another opens. But we often look so regretfully upon the closed door that we don’t see the one which has opened for us.’ Alexander Graham Bell

05-14-2010, 12:51 PM	#26
Aerocraft Senior Member Join Date: May 2010 Location: Naperville, IL Posts: 1,387	Re: Cost of Paint Sponsored Links (Register now to hide all advertisements) I have used PPG Concept for as long as it has been available and feel it is the best. Their DCC 9300 black is outstanding. Henry's painters would say " HOW DID YOU DO THAT?" Concept is expensive but with the HVLP guns it goes so much further than with my Binks #7 gun. As an alternative to the high prices, check out TCPGlobal.com. They have all the types of paint at lower prices. I have used their paint and it will certainly out last me.