Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-17-2020, 07:29 AM   #1
MuskegonFlatheadFan
Senior Member
 
MuskegonFlatheadFan's Avatar
 
Join Date: Sep 2011
Location: Muskegon, MI
Posts: 251
Default Roll down rear window

I'm new to the model A club, just picking up a '30 rumble seat coupe.
The car does not have the roll down rear window, but I sure wish it did.
Is this something that can easily be done? Is it just a matter of finding the correct parts for the swap and bolting them in, or is it a major undertaking?
Was this a factory option originally?
MuskegonFlatheadFan is offline   Reply With Quote
Old 07-17-2020, 11:06 AM   #2
Jason in TX
Senior Member
 
Jason in TX's Avatar
 
Join Date: May 2010
Location: ⓉⒺXⒶⓈ
Posts: 2,047
Default Re: Roll down rear window

Yes. This was a factory option in Late 1931 for Deluxe Coupes with a Rumble Seat.

I have a late 31 Coupe indented firewall car that didn't have it because it had a trunk. I really wanted it and found all the original parts rather than ordering a kit.

It is fairly easy. Remove the wood in your coupe. Tap bottom body flange down. Install thicker Roll Down Window wood. Install thicker rear window metal garnish. Install special shallower package tray with mount for window regulator. Mount glass to window channel and install. Run drain hose out of car from installed window gutter tray. Find correct T handle (similar to rear handle in Fordor but not the same)

The window only rolls down a little past half way. When driving, there is almost no noticeable change in breeze. It's best for being able to talk to someone in the rumble seat. Adding wind wings that you can tilt in to blow breeze in your face is the best way to get more airflow in the coupe.

Here is a kit to do it:
https://www.mikes-afordable.com/product/A91200.html

https://www.ecklers.com/model-a-ford...8-23497-1.html



How to Restore Your Model A - vol 4 has the article on building and installing a roll down rear window in a coupe.
https://www.macsautoparts.com/ford_m...-volume-4.html



Past Discussions on the Ford Barn:

https://www.fordbarn.com/forum/showthread.php?t=12515

https://www.fordbarn.com/forum/showthread.php?t=269353

https://www.fordbarn.com/forum/showthread.php?t=105077

https://www.jalopyjournal.com/forum/...w-help.382815/



__________________
--------------
Drive it like you know how to fix it!
DMAFC / OILERS CC-MC
Jason in TX is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-20-2020, 07:03 AM   #3
MuskegonFlatheadFan
Senior Member
 
MuskegonFlatheadFan's Avatar
 
Join Date: Sep 2011
Location: Muskegon, MI
Posts: 251
Default Re: Roll down rear window

Thank-You, Jason for your thorough reply.
MuskegonFlatheadFan is offline   Reply With Quote
Old 07-20-2020, 01:56 PM   #4
jak
Senior Member
 
Join Date: Sep 2010
Location: Maryland
Posts: 279
Default Re: Roll down rear window

Sponsored Links (Register now to hide all advertisements)
Also remember that the window regulator shaft will need to be drilled and tapped so you can attach the "T" handle to it.
jak is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:46 AM.