|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-13-2010, 11:55 PM | #1 |
Senior Member
Join Date: May 2010
Location: Creston Canada BC
Posts: 609
|
front seat removal Murray fordor
Any advise how to remove the front seat ? Took the spindle knob of and turned the thing all the out but no space ( forward going ) to slide it of . It hits the shifter. Backwards ? maybe ? Any advice is highly appriciated.
Gerard |
07-14-2010, 08:45 AM | #2 |
Senior Member
Join Date: May 2010
Location: Pipersville,Bucks County,PA
Posts: 142
|
Re: front seat removal Murray fordor
Hi,
I'm am a NOVICE with a 1930 Murray Town Sedan. SO, I don't know if this is the best way, but I took my front seat out by removing the screws holding the steel tracks to the body and then lifting the seat out. Regards. Mitch Bunkin
__________________
WEBSITE=http://faculty.bucks.edu/bunkinm/ "Most people ONLY want to know what they already believe and nothing more." |
Sponsored Links (Register now to hide all advertisements) |
|
07-14-2010, 09:15 AM | #3 |
Senior Member
Join Date: May 2010
Location: Fort Worth, Texas
Posts: 1,055
|
Re: front seat removal Murray fordor
take all the seat bolts out, or atleas the nut and whatever kind of washere thats on top off. then take the knob off the front of the seat thats on the bottom. Then screw that steel rod all the way back as possible. Then move the tracks forward untill the front seat bolts fall out of the track. Next lift the back up first and slide the seat forward untill the steel rod falls out of the hole. then your ready to take it out of the car. I can do it by myself, but a lot of people cant, so maybe get your wife to help with that part.
__________________
Cowtown A's |
07-14-2010, 09:55 AM | #4 |
Senior Member
Join Date: May 2010
Location: Creston Canada BC
Posts: 609
|
Re: front seat removal Murray fordor
Sponsored Links (Register now to hide all advertisements)
Gerard |
|
|
Sponsored Links (Register now to hide all advertisements) |
|