|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-25-2018, 07:12 AM | #1 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Kearny Heads for flatheads
City:
roanoke
State:
VA
Price:
$1300/pr
I have recently acquired several sets of Kearny cylinderheads fitting 1933-34 and 1935-6 Ford V8’s I bought them for a pretty decent price andwant to pass them on in the same way. They currently cost around $1600+ for a set. I am selling them for $1300plus shipping. If you need a set of heads for your flathead, then these are foryou. It’s not likely you’ll find any new heads for this low price again. Askanyone who knows Kearny heads and they’ll tell you these are great heads. Ifyou’re doing a restoration, then you need these heads.You can contact me at [email protected]if you have any questions or want toorder a set(s) of heads.Currently the heads will beshipped from Maine, until I get a chance to relocate them back to my home inVirginia. I am not a dealer, just a guy inthe right place at the right time, passing on a good thing.
Note; the 33-34 heads are numbered correctly but do not have the (ford) script on them. Non script heads were correct for both 33 and 34. I believe the script was only on later 34 heads. Last edited by lowride; 06-25-2018 at 09:37 AM. |
07-18-2018, 10:11 PM | #2 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
Bump
|
Sponsored Links (Register now to hide all advertisements) |
|
07-28-2018, 10:55 AM | #3 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
Price change to $1250 including shipping to lower 48. I will have them on display At the swapmeet at NE dragway tomorrow, 8/29. Come check them out.
|
08-09-2018, 03:11 AM | #4 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
Bump
|
08-12-2018, 11:05 AM | #5 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
Bump
|
08-16-2018, 09:04 AM | #6 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
Sponsored Links (Register now to hide all advertisements)
|
08-25-2018, 09:28 PM | #7 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
Bump
|
08-27-2018, 06:57 PM | #8 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
Bump
|
08-31-2018, 09:22 PM | #9 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
FYI, I only have three sets of 35-36 heads left. Still have several sets of the 33-34 heads.
Last edited by lowride; 09-07-2018 at 08:32 AM. |
09-07-2018, 08:35 AM | #10 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
bump
|
09-16-2018, 11:56 AM | #11 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
Bttt
|
09-18-2018, 09:19 AM | #12 |
Senior Member
Join Date: May 2010
Location: North Berwick, Maine
Posts: 141
|
Re: Kearny Heads for flatheads
bump
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|