51 Vicky Door Window Channel Felt

[Lakesmodified]

Just recently bought a 51 Vicky that’s been somewhat restored. All the window/door rubber/seals have been replaced, for the exception of the front window felt/seal that is up against the vent windows. Being that the window is “framed” in stainless steel, the seal needed us much larger than your typical felt seal. Checked with Shoebox Central, as well as a couple of the other suppliers, no help. Picture is for illustration only, as the dimensions are much larger. Unfortunately, the previous owner, discarded the originals, so I have nothing to go by. He finally installed some stick-on felt, but it’s not going to work. Thanks

[paul2748]

Try Restoration Specialties in Pennsylvania. They used to have all sorts of window channels, even some hard to find ones.

[Lakesmodified]

Originally Posted by paul2748

Try Restoration Specialties in Pennsylvania. They used to have all sorts of window channels, even some hard to find ones.

Thanks will try them tomorrow

[petehoovie]

Restoration Specialties -


https://www.restorationspecialties.c...ing_ep_41.html

148 Minnow Creek Lane,
Windber, PA. 15963
US

814-467-9842

email >

[email protected]

[mercman from oz]

1951 Ford Victoria Door Window Channel Felt

[Lakesmodified]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by mercman from oz

1951 Ford Victoria Door Window Channel Felt

That’s for a coupe not a Vicky
The Vicky and Convertible share the same channel; it’s much wider