The Ford Barn

sikopal · 10-01-2010, 07:32 AM

looking for a steering box for my '34 Roadster, no junk, want something I can swap right in mine needs complete overhaul
Send photos if you have them.

sikopal · 03-16-2011, 06:33 AM

Bttt

sikopal · 08-06-2011, 08:03 PM

Bttt

twinjoan · 08-07-2011, 04:02 PM

Sponsored Links (Register now to hide all advertisements)

You may have noticed my ad a few days ago re: steering parts. I have NOS genuine Ford steering shaft with worm and sector. 32 thru 34 use same parts. The difference being the shaft itself is shorter on the 32. This can be made to work two different ways. Either by pressing the worm gear off and putting it on your shaft or making the shaft longer by cutting it and welding a sleeve over it. I want $600. for the 13 to 1 ratio or $850. for the 15 to 1 ratio. Genuine parts are extinct to find. You may want to go repo. As I understand it they do not work very well. Elmer Swift 805-646-6440 or 805-458-0128 (Pictures on request.)

10-01-2010, 07:32 AM	#1
sikopal Junior Member Join Date: May 2010 Location: Londonderry VT Posts: 11	WTB: 1934 Ford steering box City: Londonderry State: VT looking for a steering box for my '34 Roadster, no junk, want something I can swap right in mine needs complete overhaul Send photos if you have them.

03-16-2011, 06:33 AM	#2
sikopal Junior Member Join Date: May 2010 Location: Londonderry VT Posts: 11	Re: WTB: 1934 Ford steering box Bttt

08-06-2011, 08:03 PM	#3
sikopal Junior Member Join Date: May 2010 Location: Londonderry VT Posts: 11	Re: WTB: 1934 Ford steering box Bttt

08-07-2011, 04:02 PM	#4
twinjoan Senior Member Join Date: May 2010 Posts: 2,426	Re: WTB: 1934 Ford steering box Sponsored Links (Register now to hide all advertisements) You may have noticed my ad a few days ago re: steering parts. I have NOS genuine Ford steering shaft with worm and sector. 32 thru 34 use same parts. The difference being the shaft itself is shorter on the 32. This can be made to work two different ways. Either by pressing the worm gear off and putting it on your shaft or making the shaft longer by cutting it and welding a sleeve over it. I want $600. for the 13 to 1 ratio or $850. for the 15 to 1 ratio. Genuine parts are extinct to find. You may want to go repo. As I understand it they do not work very well. Elmer Swift 805-646-6440 or 805-458-0128 (Pictures on request.)