05-19-2010, 01:19 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 217
|
Brake drums
I have read that the early Flathead Ford brake drums (1932-36) are 12 inches with a turn out of .030 as being no problem...but turn out to .060 would be a problem. Is there anyon einserting a metalband to makeup for the brake drum wear to avoid a turnout beyond 030. Thanks
|
05-19-2010, 01:33 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: Brake drums
There may be a language problem here. Turning to a diameter of 12.060 should not be a problem. Beyond that I would buy a new set of USA manufactured drums and have them installed by a shop that knows what they are doing. I have never heard of the inserted band being used. Add your location to your profile or post your location and maybe someone can suggest a good machine shop.
Charlie Stephens |
Sponsored Links (Register now to hide all advertisements) |
|
05-19-2010, 02:32 PM | #3 |
Member
Join Date: May 2010
Location: Okeechobee, FL
Posts: 41
|
Re: Brake drums
Sponsored Links (Register now to hide all advertisements)
Larry |
|
|
Sponsored Links (Register now to hide all advertisements) |
|