01-24-2017, 10:57 AM
|
#1 |
|
Junior Member
Join Date: Mar 2016
Location: Zephyrhills,Fl.
Posts: 20
|
Axle nut
41 Ford car rear axle does it take a washer between hub and nut
|
|
|
|
01-24-2017, 11:12 AM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Axle nut
Yes, but make sure that fibre gasket is in the end of the hub before the thick steel washed and nut are assembled.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein Last edited by JM 35 Sedan; 01-24-2017 at 11:34 AM. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
01-24-2017, 11:19 AM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
|
Re: Axle nut
Yes, there is a fiber dust washer and then a lock washer and then the nut. The axle and drum MUST be clean and dry then torque to around 220 to 250 ft lbs. Re check torque after around 25 or so miles.
Regards,Don |
|
|
|
|
01-24-2017, 11:23 AM
|
#4 |
|
Senior Member
Join Date: May 2010
Location: South Kingstown, R.I.
Posts: 262
|
Re: Axle nut
Sorry, but as John said the washer is a flat washer not a lock washer.
Regards, Don |
|
|
|
|
01-24-2017, 04:03 PM
|
#5 |
|
Senior Member
Join Date: Jul 2014
Location: Sharpsburg md
Posts: 480
|
Re: Axle nut
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 12:35 PM.