The Ford Barn

Dave/Green Bay · 05-20-2010, 12:23 PM

On the olld Fordbarn I was able to print a thread and put in a binder for future reference. Does anyone know how to do that on the new barn? The post on the distributor is one such thread. It would be nice to print with the pictures and not the entire page. Thanks for your help Dave/Green Bay

Ross in East Texas · 05-20-2010, 12:30 PM

If you go to the Thread Tools in the red bar at the top of the page you can get a printable version of the thread. Is this what you want?

Dave/Green Bay · 05-20-2010, 12:32 PM

Thanks Ross just what the doctor ordered Dave

Dave/Green Bay · 05-20-2010, 12:35 PM

Ross: Just tired this with the distributor post and it only print the links not the pictures any way to include pictures? Thanks Dave

Ross in East Texas · 05-20-2010, 12:47 PM

Dave, it does look like the printable version only has the links to the pictures and not the actual pictures. Have you tried a (control P) print screen?

Bruce Lancaster · 05-20-2010, 01:17 PM

Sponsored Links (Register now to hide all advertisements)

I use control-p to print entire articles, and I right -click on pictures if I want to print them separately. For pictures with important detail you can usually enlarge them by clicking, then print the larger version by right-click. I print off the whole article if I want to keep it, then often enlarge and print the pictures with detail that is important to me.

Dave/Green Bay · 05-20-2010, 02:46 PM

Thanks Bruce will give that a try. Dave

19Fordy · 05-20-2010, 04:31 PM

I do this.
1. Select thread.
2. Right click and a " save page as" screen will appear asking you to name the thread you want to save.
3.Minimize your HAMB screen and you will see the thread you saved with the name you gave it.
4. Click on that saved name and saved thread will appear with writing and photos.

05-20-2010, 12:23 PM	#1
Dave/Green Bay Senior Member Join Date: May 2010 Location: Green Bay Posts: 391	Printing a Thread On the olld Fordbarn I was able to print a thread and put in a binder for future reference. Does anyone know how to do that on the new barn? The post on the distributor is one such thread. It would be nice to print with the pictures and not the entire page. Thanks for your help Dave/Green Bay

05-20-2010, 12:30 PM	#2
Ross in East Texas Senior Member Join Date: May 2010 Location: Longview, Texas Posts: 282	Re: Printing a Thread If you go to the Thread Tools in the red bar at the top of the page you can get a printable version of the thread. Is this what you want? __________________ Ross Murphy 1939 Ford Standard Coupe

05-20-2010, 12:32 PM	#3
Dave/Green Bay Senior Member Join Date: May 2010 Location: Green Bay Posts: 391	Re: Printing a Thread Thanks Ross just what the doctor ordered Dave

05-20-2010, 12:35 PM	#4
Dave/Green Bay Senior Member Join Date: May 2010 Location: Green Bay Posts: 391	Re: Printing a Thread Ross: Just tired this with the distributor post and it only print the links not the pictures any way to include pictures? Thanks Dave

05-20-2010, 12:47 PM	#5
Ross in East Texas Senior Member Join Date: May 2010 Location: Longview, Texas Posts: 282	Re: Printing a Thread Dave, it does look like the printable version only has the links to the pictures and not the actual pictures. Have you tried a (control P) print screen? __________________ Ross Murphy 1939 Ford Standard Coupe

05-20-2010, 01:17 PM	#6
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: Printing a Thread Sponsored Links (Register now to hide all advertisements) I use control-p to print entire articles, and I right -click on pictures if I want to print them separately. For pictures with important detail you can usually enlarge them by clicking, then print the larger version by right-click. I print off the whole article if I want to keep it, then often enlarge and print the pictures with detail that is important to me.

05-20-2010, 02:46 PM	#7
Dave/Green Bay Senior Member Join Date: May 2010 Location: Green Bay Posts: 391	Re: Printing a Thread Thanks Bruce will give that a try. Dave

05-20-2010, 04:31 PM	#8
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,943	Re: Printing a Thread I do this. 1. Select thread. 2. Right click and a " save page as" screen will appear asking you to name the thread you want to save. 3.Minimize your HAMB screen and you will see the thread you saved with the name you gave it. 4. Click on that saved name and saved thread will appear with writing and photos.