|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-02-2014, 04:11 AM | #1 |
Senior Member
Join Date: Jun 2010
Location: adelaide australia
Posts: 163
|
Rear Wheel Bearings
Is there a press fit hardened sleeve and undersized wheel bearing for the 32 to 48 rear differential. OD of Housing bearing surface is 2.06".
I know I can get a sleeve that needs machining of the old bearing surface and uses a standard wheel/hub bearing. Hoping to avoid this. Cheers Last edited by BLACKNRED; 05-02-2014 at 04:25 AM. |
05-02-2014, 08:25 AM | #2 |
Senior Member
Join Date: May 2010
Posts: 642
|
Re: Rear Wheel Bearings
I have an Early set installed on 1932 early housings. do not need Bro + S&H kc
|
Sponsored Links (Register now to hide all advertisements) |
|
05-02-2014, 10:34 AM | #3 |
Senior Member
Join Date: May 2010
Location: ManchVegas, New Hampshah
Posts: 1,589
|
Re: Rear Wheel Bearings
If you have not seen this thread, take a look. It may be a good alternative.
http://www.fordbarn.com/forum/showthread.php?t=21139 Post 27 has pics of this mod.
__________________
You are never to old to enjoy your childhood. Forty1fordpickup on the HAMB. |
05-02-2014, 06:38 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: adelaide australia
Posts: 163
|
Re: Rear Wheel Bearings
Sponsored Links (Register now to hide all advertisements)
cheers |
|
|
Sponsored Links (Register now to hide all advertisements) |
|