|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-01-2014, 09:11 AM | #1 |
Senior Member
Join Date: May 2010
Location: Deep DEEP South
Posts: 223
|
Press on aluminium cam gear
All, I did a search but did'nt turn up anything.
Does anyone know who sells a PRESS ON Aluminium Cam gear for a 21 stud cam that takes a press fit gear. Valves springs pressure is mild but prefer an aluminium if one is available. I see Red's and Vanpelt Sales don't list one online. Can someone help with a source for one? Thanks !! BFD |
05-01-2014, 10:14 AM | #2 |
Senior Member
Join Date: May 2010
Location: Mt. Holly,NJ
Posts: 1,822
|
Re: Press on aluminium cam gear
Press on aluminum gears were made for the Ford big trucks in 1938 and/or 1939. I had one in my Lincoln after the fiber gear went south. I bought two of them at Hershey that year, used one and sold the other. I don't know if they were available in the parts department and doubt that there was an after market one. Best bet would be to try the parts wanted and look hard at the swap markets.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-01-2014, 11:12 AM | #3 |
Senior Member
Join Date: May 2010
Posts: 893
|
Re: Press on aluminium cam gear
sent a pm
|
05-01-2014, 05:24 PM | #4 |
Senior Member
Join Date: May 2010
Location: Dyer, Indiana
Posts: 129
|
Re: Press on aluminium cam gear
I bought my last one from Little Dearborn parts.
|
05-01-2014, 06:43 PM | #5 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Press on aluminium cam gear
They are out there to be found. I bought one from Mac VanPelt, one from another Fordbarner, two on ebay and two at a local flea market.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
05-01-2014, 09:45 PM | #6 |
Senior Member
Join Date: May 2010
Location: Deep DEEP South
Posts: 223
|
Re: Press on aluminium cam gear
|
05-03-2014, 07:09 AM | #7 |
Senior Member
Join Date: Jul 2010
Location: Cairns , Australia
Posts: 744
|
Re: Press on aluminium cam gear
Hi bfd, i bought a nos one on ebay in the usa. You just have to keep checking till one turns up. Dan.
|
05-03-2014, 07:10 AM | #8 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,954
|
Re: Press on aluminium cam gear
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|