The Ford Barn

wrndln · 06-05-2013, 11:27 AM

I have a pair of clips that I am not sure what they fit. I have had them many years and can't remember where I got them. I was hoping they were for a 28/29 pickup (bottom seatback brackets) but the holes don't line up with the ones in the seatback slats. I need seat clips for the bottom of a 28/29 CCPU backrest. I have a feeling the brackets in the picture might be for the top of the rear seat for a 28/29 tudor. Also, they look bent to me - are they? If someone would kindly identify them, I would appreciate it.
Rusty Nelson

1931 flamingo · 06-05-2013, 04:00 PM

Rear arm rest front clips??
Paul in CT

d.j. moordigian · 06-07-2013, 01:03 PM

Quote:

Originally Posted by 1931 flamingo

Rear arm rest front clips??
Paul in CT

Paul,

Is your "??" a good guess or a shot in the dark?

Dudley

grantsauder · 06-07-2013, 03:26 PM

WRNDLN:
These are 28-29 Tudor Sedan top backrest clips. They rivet to the top of the rear seat backrest wood frame. Bratton's #35701
I made my own clips for my 1930 Tudor two years ago,with measurements taken from an unrestored back seat frame. Grant

wrndln · 06-07-2013, 05:46 PM

Thanks, Grant. I appreciate you taking time to post a response. Do you know if they look right or are bent?
Rusty Nelson

RockHillWill · 06-07-2013, 06:26 PM

Sponsored Links (Register now to hide all advertisements)

Rusty, I have also seen these at the top of pick up seat back wooden rail, just under the rear window. I have seen 2 and three used to hold up the top of the back seat cushion.

d.j. moordigian · 06-07-2013, 06:28 PM

Will,
28-29 or 30-31?

grantsauder · 06-07-2013, 07:51 PM

WRNDLN: The bends look very correct. I had to adjust mine twice to get them to slip into the body clips located in the back inside rail where the back seat cuishen hangs . On the '30 there are two flat clips on the bottom of the frame that bolts to the body clips. I imagine the 28-29 are the same.Grant.

Tom Wesenberg · 06-07-2013, 09:27 PM

Rusty, see my picture in post #3 on my 2-23-29 Tudor rear seat back clips. Mine also has the slots, as it was built during the changeover period.

http://www.fordbarn.com/forum/showth...erior+pictures

1931 flamingo · 06-07-2013, 09:40 PM

Rusty: Sorry I didn't get back to you. The other responders are right.
Paul

Mike V. Florida · 06-07-2013, 10:41 PM

Quote:

Originally Posted by grantsauder

WRNDLN:
These are 28-29 Tudor Sedan top backrest clips. They rivet to the top of the rear seat backrest wood frame. Bratton's #35701
I made my own clips for my 1930 Tudor two years ago,with measurements taken from an unrestored back seat frame. Grant

Click for picture
Sedan top backrest clip

wrndln · 06-07-2013, 11:35 PM

Tom,
Thanks for posting the link to the picture you posted sometime back. I guess that pretty much ices it - they are definitely 28/29 tudor upper rear seatback clips. I don't need them as I don't have a tudor, but it is nice to know what they are for, if someone needs an original set.
Rusty Nelson

06-05-2013, 11:27 AM	#1
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,162	Clips needing to be identified I have a pair of clips that I am not sure what they fit. I have had them many years and can't remember where I got them. I was hoping they were for a 28/29 pickup (bottom seatback brackets) but the holes don't line up with the ones in the seatback slats. I need seat clips for the bottom of a 28/29 CCPU backrest. I have a feeling the brackets in the picture might be for the top of the rear seat for a 28/29 tudor. Also, they look bent to me - are they? If someone would kindly identify them, I would appreciate it. Rusty Nelson

06-05-2013, 04:00 PM	#2
1931 flamingo Senior Member Join Date: May 2010 Location: new britain,ct 06052 Posts: 9,390	Re: Clips needing to be identified Rear arm rest front clips?? Paul in CT

06-07-2013, 03:26 PM	#4
grantsauder Member Join Date: Nov 2012 Location: St. Davids, Ontario, Canada Posts: 84	Re: Clips needing to be identified WRNDLN: These are 28-29 Tudor Sedan top backrest clips. They rivet to the top of the rear seat backrest wood frame. Bratton's #35701 I made my own clips for my 1930 Tudor two years ago,with measurements taken from an unrestored back seat frame. Grant

06-07-2013, 05:46 PM	#5
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,162	Re: Clips needing to be identified Thanks, Grant. I appreciate you taking time to post a response. Do you know if they look right or are bent? Rusty Nelson

06-07-2013, 06:26 PM	#6
RockHillWill Senior Member Join Date: May 2010 Location: Rock Hill, S.C. Posts: 985	Re: Clips needing to be identified Sponsored Links (Register now to hide all advertisements) Rusty, I have also seen these at the top of pick up seat back wooden rail, just under the rear window. I have seen 2 and three used to hold up the top of the back seat cushion. __________________ Uncle Bud says "too soon old, too late smart!"

06-07-2013, 06:28 PM	#7
d.j. moordigian Senior Member Join Date: May 2010 Location: Fresno, Ca. Posts: 3,636	Re: Clips needing to be identified Will, 28-29 or 30-31?

06-07-2013, 07:51 PM	#8
grantsauder Member Join Date: Nov 2012 Location: St. Davids, Ontario, Canada Posts: 84	Re: Clips needing to be identified WRNDLN: The bends look very correct. I had to adjust mine twice to get them to slip into the body clips located in the back inside rail where the back seat cuishen hangs . On the '30 there are two flat clips on the bottom of the frame that bolts to the body clips. I imagine the 28-29 are the same.Grant.

06-07-2013, 09:27 PM	#9
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Clips needing to be identified Rusty, see my picture in post #3 on my 2-23-29 Tudor rear seat back clips. Mine also has the slots, as it was built during the changeover period. http://www.fordbarn.com/forum/showth...erior+pictures

06-07-2013, 09:40 PM	#10
1931 flamingo Senior Member Join Date: May 2010 Location: new britain,ct 06052 Posts: 9,390	Re: Clips needing to be identified Rusty: Sorry I didn't get back to you. The other responders are right. Paul

06-07-2013, 11:35 PM	#12
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,162	Re: Clips needing to be identified Tom, Thanks for posting the link to the picture you posted sometime back. I guess that pretty much ices it - they are definitely 28/29 tudor upper rear seatback clips. I don't need them as I don't have a tudor, but it is nice to know what they are for, if someone needs an original set. Rusty Nelson