The Ford Barn

rawlir · 10-10-2020, 11:38 AM

Hello,
I have 2 46 & 2 47 Ford Conventional trucks, (not COE's)
3 of the 4 have the 1.5 inch (+or-) firewall hole into the cab in front of the driver for the instrument panel in exactly the same location. The 4th, (the one i am starting to install the wire harness) is 3 inches or so directly to the right of the others, anyone seen this?
I am trying to determine if that offset is going to cause an installation problem with the wire harness installation/placement? I bought my wire harness from Tyree Harris on the East Coast....
If anyone has seen that hole where i am talking about would very much appreciate hearing from you as to what you may know of that.....

Thank you!
Rick 425 766 7408 [email protected]

Doublepumper · 10-10-2020, 04:06 PM

Sponsored Links (Register now to hide all advertisements)

rawlir......email inbound.

10-10-2020, 11:38 AM	#1
rawlir Member Join Date: Dec 2012 Location: Spokane Valley, WA Posts: 92	46&47 Ford Conventional trucks Wire harness Hello, I have 2 46 & 2 47 Ford Conventional trucks, (not COE's) 3 of the 4 have the 1.5 inch (+or-) firewall hole into the cab in front of the driver for the instrument panel in exactly the same location. The 4th, (the one i am starting to install the wire harness) is 3 inches or so directly to the right of the others, anyone seen this? I am trying to determine if that offset is going to cause an installation problem with the wire harness installation/placement? I bought my wire harness from Tyree Harris on the East Coast.... If anyone has seen that hole where i am talking about would very much appreciate hearing from you as to what you may know of that..... Thank you! Rick 425 766 7408 [email protected]

10-10-2020, 04:06 PM	#2
Doublepumper Member Join Date: Aug 2017 Location: WA-OR, USA Posts: 68	Re: 46&47 Ford Conventional trucks Wire harness Sponsored Links (Register now to hide all advertisements) rawlir......email inbound.