The Ford Barn

Gary in Mozarks · 08-31-2011, 08:41 AM

My 39 project has a 4.11 rear end and Id like to have a 3.78, so I pulled the 38 frame up to the shop to check the ratio in that rear end, but dang, it looks like its a 40/9 stamed on the bottom. 4.44? You don't hear thoses numbers much, Musta been a real stump puller

Gary

alanwoodieman · 08-31-2011, 08:56 AM

probably from a 60 Hp car which came stock with a 4:44 gears. If you want a 3:78 PM me, Alan in SC

popeye · 08-31-2011, 07:54 PM

I might have a set of 3.78's. Let me look, might be a day or so before I can get to it.

I am about 100 miles north of Springfield if that helps.

popeye · 09-03-2011, 08:41 PM

Sponsored Links (Register now to hide all advertisements)

Checked the rearend that I have and its 411 also.

08-31-2011, 08:41 AM	#1
Gary in Mozarks Senior Member Join Date: May 2010 Location: Vienna Mo Posts: 232	I think I sorta struck out on rear ends. My 39 project has a 4.11 rear end and Id like to have a 3.78, so I pulled the 38 frame up to the shop to check the ratio in that rear end, but dang, it looks like its a 40/9 stamed on the bottom. 4.44? You don't hear thoses numbers much, Musta been a real stump puller Gary

08-31-2011, 08:56 AM	#2
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,963	Re: I think I sorta struck out on rear ends. probably from a 60 Hp car which came stock with a 4:44 gears. If you want a 3:78 PM me, Alan in SC

08-31-2011, 07:54 PM	#3
popeye Member Join Date: May 2010 Location: Missouri Posts: 34	Re: I think I sorta struck out on rear ends. I might have a set of 3.78's. Let me look, might be a day or so before I can get to it. I am about 100 miles north of Springfield if that helps.

09-03-2011, 08:41 PM	#4
popeye Member Join Date: May 2010 Location: Missouri Posts: 34	Re: I think I sorta struck out on rear ends. Sponsored Links (Register now to hide all advertisements) Checked the rearend that I have and its 411 also.