|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-26-2020, 03:34 PM | #1 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
34 Tailite wiring
34 ford with two tail lites. The crossover wire to right tail lite. What is the proper or original location/. tO THE CROSSMEMBER, FRONT OR BACK SIDE/. Thanks for any help. Stan
|
08-26-2020, 04:02 PM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,123
|
Re: 34 Tailite wiring
The back lip of the rear cross member attached with two short (1 1/8" overall length) spring steel clips (one per side about half way between the center and outer end of the cross member). Originally, the wires from the tail lamps were not long enough to connect to the crossover harness if it were routed in front of the rear cross member.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-26-2020, 11:39 PM | #3 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
Re: 34 Tailite wiring
Thanks, David I appreciate your help! Stan
|
08-27-2020, 06:46 AM | #4 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,123
|
Re: 34 Tailite wiring
Sponsored Links (Register now to hide all advertisements)
You're welcome! David P.S. If you need the clips, Michael Driskell of Third Gen automotive (thirdgenauto.com) has them in stock as I am ordering some as well. His part number for them is B-14586-ST. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|