Desparate - Need Help the worst sort of way (sorry not Ford related)

[rockfla]

I know its not Ford related (and IF Ryan deletes it I understand OR Sorry to step on toes and post somewhat out of place) BUT this is how desperate I have become.... I need this piece "desperately" SO I can get my best friend Jeep out of my shop (We've been looking for a year now) and I NEED to make room for my own Flathead project's!!!! I need a left rear fender off of a Willy's pick up OR better yet a 48-51 Jeepster. I really only need the part circle OFF of the left rear fender BUT IF I could find one from a Jeepster, the more I have to work with the better for me!!!! ANY HELP would be "next level" appreciated. MAYBE you big truck guys (Like Newc, GB Sisson) know of one in your area??? PLEASE help me get this albatross from around me neck (IE out of my shop)!!!!


DID I mention we are desperate (we've even had an ad on the Willys Tech board) with NO luck and my friend here of late seem content on being content. I am grasping at straws here...!!!! BUT just maybe someone here might be able to help?? PM me If you know of something

[petehoovie]

Originally Posted by rockfla

I need a left rear fender off of a Willy's pick up OR better yet a 48-51 Jeepster. I really only need the part circle OFF of the left rear fender BUT IF I could find one from a Jeepster, the more I have to work with the better for me!!!!

[banjoQ]

This might be worth a try. There is a Willy’s- Jeep parts house and salvage in Cazadero Ca. You can look them up online. Been there myself but do not remember the name. Big place with lots of donors. Good luck

[rockfla]

Originally Posted by banjoQ

This might be worth a try. There is a Willy’s- Jeep parts house and salvage in Cazadero Ca. You can look them up online. Been there myself but do not remember the name. Big place with lots of donors. Good luck

Thanks a million, I'm on it!!!!

[Lawson Cox]

Looks like something a good body man should be able to make, especially if he is good on an English wheel.

[rockfla]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Lawson Cox

Looks like something a good body man should be able to make, especially if he is good on an English wheel.

I have an English wheel but my talents or confidence isn't that high "yet".....BUT It may come to that!!!! As you can partially see, the fender is quite rippled (what part you can't see is worse) and has also lost the angle to it toward the bottom 1/4.... AND the repair from back in 1970, they used an Oxy Acetylene torch and braising rod to fix it, put a TON of heat into it and LOST a lot of the factory contour to the fender and under structure. SO as much of a fender as I can get will help me rebuild the under structure as well SO I would much prefer to have a factory piece to build to than to try and recreate the wheel so to speak!!!!!

[rockfla]

Originally Posted by Lawson Cox

Looks like something a good body man should be able to make, especially if he is good on an English wheel.

Lawson (And others)
You can see in the second photo how much contour was lost based on my patch panel I have made. There is a lot of subtle details and angles lost in this area...that's why I prefer to have good "original" piece to work off of!!!!

[rockfla]

Here is the patch panel I made a little better fitted, as you can see on both sides the lost shape.

[petehoovie]

Originally Posted by rockfla

Lawson (And others)
You can see in the second photo how much contour was lost based on my patch panel I have made. There is a lot of subtle details and angles lost in this area...that's why I prefer to have good "original" piece to work off of!!!!

[petehoovie]

Originally Posted by rockfla

Lawson (And others)
You can see in the second photo how much contour was lost based on my patch panel I have made. There is a lot of subtle details and angles lost in this area...that's why I prefer to have good "original" piece to work off of!!!!

[Marcus]

Rockfla: google kaiserwillys.com and search the catalog; google willysforsale.com (there are parts vehicles available); if still no joy, call Mike at kaiserwillys ~ he may have a used fender available. Finally, other sources: Jerry Gardener, 903.530.2172 or Harry at Mid~West Willys, 765.362.2247. Good luck!

[GB SISSON]

I know a place where there are a couple of jeep trucks like that but they are pretty sunk into the damp earth. If I get out that way I will look, but don't hold your breath for decent tin in my part of the country. East of the Cascade Mountain Range is a totally different story.

[rockfla]

Originally Posted by GB SISSON

I know a place where there are a couple of jeep trucks like that but they are pretty sunk into the damp earth. If I get out that way I will look, but don't hold your breath for decent tin in my part of the country. East of the Cascade Mountain Range is a totally different story.

It would be greatly appreciated GB!!

[rockfla]

Originally Posted by Marcus

Rockfla: google kaiserwillys.com and search the catalog; google willysforsale.com (there are parts vehicles available); if still no joy, call Mike at kaiserwillys ~ he may have a used fender available. Finally, other sources: Jerry Gardener, 903.530.2172 or Harry at Mid~West Willys, 765.362.2247. Good luck!

Thank you very much for those leads, I will get on them asap. Greatly appreciate it Sir. Most all the after market supply houses sell the fender BUT they are fiberglass and I can’t use it!!! One would think that IF there is a big enough market for fiber glass SoMEONe would have reproduced them
In steel?

[Newc]

Toledo, Or jeepster parts house. Newc

[95476]

Willy's America
Cazadero, Calif.
707-632 5258
If they don't have it they willl know someone who does.

[rockfla]

Originally Posted by 95476

Willy's America
Cazadero, Calif.
707-632 5258
If they don't have it they willl know someone who does.

All they have is a fiber glass fender, thank you for the suggestion

Working the other suggestions posted, thank you all

[1931 flamingo]

If it's good quality f/glass, only you and he will know. JMO
Paul in CT

[trulyvintage]

Why do you need a fender to get
a vehicle out of your shop ?

Won’t it roll or drive without the fender ?

Worry about the fender when the vehicle
is out of your shop …,,


Jim

[rockfla]

Originally Posted by trulyvintage

Why do you need a fender to get
a vehicle out of your shop ?

Won’t it roll or drive without the fender ?

Worry about the fender when the vehicle
is out of your shop …,,


Jim

I am helping my best friend “restore” his first car. He was “supposed” to be working on it and I “was” gonna “HELP” him where needed. He “NOW” seem content on being “content” with it sitting in my shop and/or “me” restoring
It for him. It’s the “last” major repair
Needed to the body. I figured IF I get the majority
Of it fixed THEN I can call him to come get it and do with it what he
Pleases!!!

[trulyvintage]

Originally Posted by rockfla

I am helping my best friend “restore” his first car. He was “supposed” to be working on it and I “was” gonna “HELP” him where needed. He “NOW” seem content on being “content” with it sitting in my shop and/or “me” restoring
It for him. It’s the “last” major repair
Needed to the body. I figured IF I get the majority
Of it fixed THEN I can call him to come get it and do with it what he
Pleases!!!

A real friend wouldn’t expect you to store
their vehicle this way.

Kick it to the curb and let your friend deal with it.

Don’t be a “ solution “ to someone else’s’ problem.

Jim

[V8COOPMAN]

Originally Posted by rockfla

I am helping my best friend “restore” his first car. He was “supposed” to be working on it and I “was” gonna “HELP” him where needed.

Man, I wouldn't have thought that a real friend would have let a "best friend" buy one of THOSE thingys. Coop

[Zax40]

I know a lot of guys in the Jeepster-Commando club. I'll ask around

[Zax40]

First guy I reached out to said to call these guys:

Company
Jeepster Man Inc;
Open: M-F 8:00AM-4:30PM CST, Closed on Saturdays and Sundays
Address
201 VFW Drive
Festus MO 63028
US
Phone
314-798-6462 Office
Fax
[email protected]
Other 1Shipping Questions: [email protected]
Other 2Returns: [email protected]

[rockfla]

Thank you Zax40, email sent!!!

[PeteVS]

Sponsored Links (Register now to hide all advertisements)

In my travels on Sunday, I happened across this later truck. I have no idea of the age but it appears that Jeep was using the same fender for some time. What's more, it appears to be symmetrical meaning that either a left or a right could be used for your patch or replacement.

[rockfla]

Thanks PeteVS, I will check them out IF i can find one!!

[PeteVS]

Apparently this model was made from '63 until ''87.

https://www.caranddriver.com/feature...rucks/?slide=5

[B-O-B]

had a 63 Wagoneer that had torsion bar front end O H V 6 with a fordomatic tranny.