The Ford Barn

Brian SATX · 07-01-2022, 09:27 AM

I know there is a way to check toe in using a 2x4 and some rubber bands but I cannot find it. Can anyone direct me to a place that has the procedure in writing/diagrams? Thanks in advance.

eagle · 07-01-2022, 09:39 AM

I just rolled the car on clean flat concrete for a couple wheel revolutions, then used a tape measure on the rim. Of course you have to first make sure your rims are true. I set mine for 1/8" toe in. This was about 10 years ago. Tire wear is even and it drives very well.

petritl · 07-06-2022, 05:14 PM

Sponsored Links (Register now to hide all advertisements)

Brian,
If you are still in need, I have a toe measurement tool you can borrow.

Tad Petrie

07-01-2022, 09:27 AM	#1
Brian SATX Senior Member Join Date: May 2010 Location: San Antonio, TX Posts: 821	Toe in on front in I know there is a way to check toe in using a 2x4 and some rubber bands but I cannot find it. Can anyone direct me to a place that has the procedure in writing/diagrams? Thanks in advance. __________________ Brian SATX

07-01-2022, 09:39 AM	#2
eagle Senior Member Join Date: Aug 2011 Location: Eagle Bend, MN Posts: 2,025	Re: Toe in on front in I just rolled the car on clean flat concrete for a couple wheel revolutions, then used a tape measure on the rim. Of course you have to first make sure your rims are true. I set mine for 1/8" toe in. This was about 10 years ago. Tire wear is even and it drives very well. __________________ "There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."

07-06-2022, 05:14 PM	#3
petritl Junior Member Join Date: May 2010 Posts: 3	Re: Toe in on front in Sponsored Links (Register now to hide all advertisements) Brian, If you are still in need, I have a toe measurement tool you can borrow. Tad Petrie