|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-05-2023, 04:15 PM | #1 |
Junior Member
Join Date: May 2010
Location: nor-cal
Posts: 27
|
Transmission conversion
I'm attempting to replace a non synchro 4 speed in a 51 F-1 with the light duty 3 speed topshifter, can I use the 4 speed rear trans rubber mount? It looks very similar to the rear trans mount on a 47 truck.
|
03-05-2023, 04:56 PM | #2 |
Senior Member
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,361
|
Re: Transmission conversion
If you’re referring to the saddle shaped rear mount, the answer is yes…..as long as the truck is the F-1 half ton and not something bigger.
__________________
VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com |
Sponsored Links (Register now to hide all advertisements) |
|
03-05-2023, 06:00 PM | #3 |
Junior Member
Join Date: May 2010
Location: nor-cal
Posts: 27
|
Re: Transmission conversion
Great Its a half ton. Thanks for the info. I'm guessing a driveshaft out of a 47 open driveline should fit?
|
03-05-2023, 06:32 PM | #4 |
Senior Member
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,361
|
Re: Transmission conversion
Sponsored Links (Register now to hide all advertisements)
__________________
VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com |
|
|
Sponsored Links (Register now to hide all advertisements) |
|