The Ford Barn

Ken Henry · 04-15-2021, 04:40 PM

I just had these EAB heads blasted and plan to have them milled for ~0.050" clearance after measuring with my block (in progress). A few of the chambers show some moderate pitting though. Is this OK or should I seek out a nicer set? The combustion chambers range from 68-71cc. Thanks!! Ken

Click the images for higher resolution

BF8E9D00-A127-48E4-A35C-CCA328BAB033 by kenhenry_06268, on Flickr

E633D7A2-85F2-47D8-AED2-DF3131844C7C by kenhenry_06268, on Flickr

B774E442-88BE-4F57-8291-852A87BEC30F by kenhenry_06268, on Flickr

E0D9CCE5-B763-4A46-8030-2502560FBB11 by kenhenry_06268, on Flickr

73F1519B-0EB7-4067-8443-97382B7C3173 by kenhenry_06268, on Flickr

04-15-2021, 04:40 PM	#1
Ken Henry Senior Member Join Date: Jul 2010 Location: Rochester, NY Posts: 266	Are these EAB heads OK? I just had these EAB heads blasted and plan to have them milled for ~0.050" clearance after measuring with my block (in progress). A few of the chambers show some moderate pitting though. Is this OK or should I seek out a nicer set? The combustion chambers range from 68-71cc. Thanks!! Ken Click the images for higher resolution BF8E9D00-A127-48E4-A35C-CCA328BAB033 by kenhenry_06268, on Flickr E633D7A2-85F2-47D8-AED2-DF3131844C7C by kenhenry_06268, on Flickr B774E442-88BE-4F57-8291-852A87BEC30F by kenhenry_06268, on Flickr E0D9CCE5-B763-4A46-8030-2502560FBB11 by kenhenry_06268, on Flickr 73F1519B-0EB7-4067-8443-97382B7C3173 by kenhenry_06268, on Flickr