victoria wood

[art ebeling]

I am trying to nail the sheet metal to the wood structure on my 31 Victoria. Does anyone have a picture of the wood that the side of the roof under the gutter and above of the door nails to? I seem to be missing something. Thanks, Art

[CA Victoria]

Picture of wood above window.

[CA Victoria]

http://www.fordwood.com/images/viccy31Lnew.jpg

[art ebeling]

Thanks, but I need pics of above the door that the below the gutters nail to on the ouside. It is not clear on the Fordwood diagram.

[jw hash]

Art
keep in mind, you have a steel back. the wood is different then a leather back. so you need some pictures of a steel back.

[Bob Bidonde]

Sponsored Links (Register now to hide all advertisements)

Do these photos of Steel-Back wood help?

[art ebeling]

Originally Posted by Bob Bidonde

Do these photos of Steel-Back wood help?

Almost, how is the the ouside. under the rain gutter nailed on? It could only be seen if the upper door jamb trim piece was not installed. As you can see in this picture the there is no wood for the nailing flange to attach to. Thanks, Art

[5window]

This Victoria Wood is a lot more entertaining-and this is a great clip:

https://www.youtube.com/watch?v=lNU5KVa_Tu8

[Mike V. Florida]

Maybe side by side you can see the difference;

[jw hash]

Art
you are missing the lower door header piece of wood and do you have the door header cover it will cover up them nail holes. that cover is different then the leather back.

[Randy in ca]

As well as the piece of wood you're missing (as in Bob's middle picture) there's the door header cover piece(s?) jw refers to:

-

[Mike V. Florida]

Originally Posted by Randy in ca

As well as the piece of wood you're missing (as in Bob's middle picture) there's the door header cover piece(s?) jw refers to:

-

These are pictures on the metal pieces.

[art ebeling]

Now I see it. I do have the two trim pieces but I must be missing the wood header piece. Does anyone have a picture of it or the dimensions? Thanks, Art

[jw hash]

try classic wood. I would think they will sell just the two you need.

[CA Victoria]

I have a leatherback and I'm not familiar with the wood header and steel jam from a steel back. If they are the same the wood piece that screws to the header is 3/4" sq. which supports the inside edge of the cap which covers the wood header.

[jw hash]

Tim
they are NOT the same.

[Mike V. Florida]

I think this is what you need. For some reason this is the largest it will make it. Send me your email and I'll email the original Tiff.

[art ebeling]

Thanks Mike, but that is the quarter header wood. I am needing the door jamb wood. Art

[Mike V. Florida]

Originally Posted by art ebeling

thanks mike, but that is the quarter header wood. I am needing the door jamb wood. Art

oops

[Bob Bidonde]

My 190A Steel-Back is not available to check right now, but I believe that the rain gutters are welded to the body on the Steel-Back.