The Ford Barn

1929 · 02-19-2016, 08:46 PM

Is there anything better to use instead of that two piece felt and cover plate by the steering column?

Pinesdune · 02-19-2016, 08:53 PM

Not sure if this is "better", but this is what my car uses
http://www.snydersantiqueauto.com/pedal-seal

Looking for the front bumper emblem that has "Ford, Made In Canada"

1929 · 02-19-2016, 08:59 PM

Quote:

Originally Posted by Pinesdune

Not sure if this is "better", but this is what my car uses
http://www.snydersantiqueauto.com/pedal-seal

Looking for the front bumper emblem that has "Ford, Made In Canada"

I did see that, and like it, except can it be used on a 1929?, I thought it stated only 1928.

Pinesdune · 02-19-2016, 09:35 PM

Quote:

Originally Posted by 1929

I did see that, and like it, except can it be used on a 1929?, I thought it stated only 1928.

I happen to have both on hand, here's some pics

They're not a perfect match but real close, hope the pics help. My car is an early 28, I tried the steel and it would need a little tweaking to fit, not sure how the early 28 rubber would fit a 29

Looking for the front bumper emblem that has "Ford, Made In Canada"

burner31 · 02-20-2016, 01:58 AM

$73 is kind of rich...don't you think?

BILL WILLIAMSON · 02-20-2016, 06:14 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by burner31

$73 is kind of rich...don't you think?

For the price, I'd craft one from an old floormat, to fit under the metal one. A slightly firm foam rubber "might" be a good choice, also??? It could be sprayed BLACK.
Bill W.

2manycars · 02-20-2016, 07:42 AM

I have for a long time considered, but have not done, a modification to the pedals like the later cars had, with a small flange on the pedal, under the floorboard, that seals the hole when the pedal is up. My 40 ford had that feature.

Tinbasher · 02-20-2016, 07:53 AM

The early style is 28 with the left hand emergency brake. The later style is mid 28 - 29. What's the production date on your firewall? It's on the drivers side near the lower flange.
The first one was used until Nov. 28. U.S. Canadian may have been longer. Buy a copy of the Judging standards. It's a huge help. (But at times can be confusing.)!!!LOL

John Poole

jw hash · 02-20-2016, 09:26 AM

I think all the venders sell only one felt, that will fit some model A`s but not all. I think Ford made more then one size, they do NOT fit the Victoria`s a 400`s or slant window 68C ,so I bought some of the correct size felt from Amazon.com and made my own that fits.

02-19-2016, 08:46 PM	#1
1929 Senior Member Join Date: Jan 2015 Location: New York Posts: 943	Floorboard? Is there anything better to use instead of that two piece felt and cover plate by the steering column?

02-19-2016, 08:53 PM	#2
Pinesdune Senior Member Join Date: Oct 2015 Location: Canada Posts: 414	Re: Floorboard? Not sure if this is "better", but this is what my car uses http://www.snydersantiqueauto.com/pedal-seal Looking for the front bumper emblem that has "Ford, Made In Canada"

02-20-2016, 01:58 AM	#5
burner31 Senior Member Join Date: Dec 2014 Location: Shawnee, Ok Posts: 3,471	Re: Floorboard? $73 is kind of rich...don't you think? __________________ Keith Shawnee OK '31 SW 160-B

02-20-2016, 07:42 AM	#7
2manycars Senior Member Join Date: May 2010 Location: Eastern CT Posts: 2,732	Re: Floorboard? I have for a long time considered, but have not done, a modification to the pedals like the later cars had, with a small flange on the pedal, under the floorboard, that seals the hole when the pedal is up. My 40 ford had that feature.

02-20-2016, 07:53 AM	#8
Tinbasher Senior Member Join Date: May 2010 Location: Innisfil, Ontario Canada Posts: 1,174	Re: Floorboard? The early style is 28 with the left hand emergency brake. The later style is mid 28 - 29. What's the production date on your firewall? It's on the drivers side near the lower flange. The first one was used until Nov. 28. U.S. Canadian may have been longer. Buy a copy of the Judging standards. It's a huge help. (But at times can be confusing.)!!!LOL John Poole

02-20-2016, 09:26 AM	#9
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: Floorboard? I think all the venders sell only one felt, that will fit some model A`s but not all. I think Ford made more then one size, they do NOT fit the Victoria`s a 400`s or slant window 68C ,so I bought some of the correct size felt from Amazon.com and made my own that fits.