Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-05-2019, 08:12 PM   #1
johnny
Senior Member
 
Join Date: May 2010
Location: London On, Can.
Posts: 377
Default electronic dis 38 ford

we are going to try a electronic dis, on a 38 Ford there are two wires coming from the dis ,my Mech. is not sure where they connect .can you help? Thanks
johnny is offline   Reply With Quote
Old 06-05-2019, 09:33 PM   #2
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
Default Re: electronic dis 38 ford

most likely one goes to each side of the coil ----50-50, but connecting wrong may prevent operation when connected correct ----post pictures, somebody will have the same one and be able to tell you
Kurt in NJ is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-07-2019, 08:11 PM   #3
johnny
Senior Member
 
Join Date: May 2010
Location: London On, Can.
Posts: 377
Default Re: electronic dis 38 ford

Sponsored Links (Register now to hide all advertisements)
Thanks Kurt Your advise is what we thought
johnny is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:08 AM.