The Ford Barn

40coupefan · 11-18-2013, 10:11 PM

1931 Murray slant window 4 door body (only) and all of the miscellaneous body parts shown. Fenders with splash aprons, new running boards, seat pan with all seat springs, front and rear bumpers with arms (bumper irons), top vinyl with padding, door scruff plates, new door handles (inside and out), door latches, window regulators, garnish moldings, gas tank, chrome windshield frame with glass, interior wood and top bows. I am not selling the frame, running gear, motor, transmission, radiator or grille shell. I am changing directions and going with a roadster body.

01 by Bib Overalls, on Flickr

02 by Bib Overalls, on Flickr

04 by Bib Overalls, on Flickr

06 by Bib Overalls, on Flickr

Click here to see 20 additional high resolution photos. http://www.flickr.com/photos/ratpois...7637737844025/ PM if interested or call Larry at 870-483-3250. Thanks for looking!!

40coupefan · 11-20-2013, 03:42 PM

We incorrectly listed as Murray, car is actually a Briggs body. Guys I have a lot of parts that goes with the body!

C4engr · 11-20-2013, 06:42 PM

The body shown is a Murray.... The top part of the door window frame is curved.... Briggs window frames were straight..

Your original listing is correct...

Roger

Bill Underwood · 11-20-2013, 07:00 PM

Roger, your comment is correct as to non-slants; incorrect on slants.However, B & M slants are virtually the same. Small nuances such as rear valance, cage nuts vs d-nuts. Those woild be the litmus.

40coupefan · 12-19-2013, 05:37 PM

Thursday bump! $2200.00!

ialbel · 12-25-2013, 05:26 PM

Sponsored Links (Register now to hide all advertisements)

I need door hinges for my Victoria ...are your extras for sale?

Zmanx98 · 12-26-2013, 07:22 PM

The body looks like a Murray, has it been determined which it is? I assume the ID plates are gone from the firewall? I have a body that is in bad shape on my Murray.

40coupefan · 12-31-2013, 08:21 AM

New Price $2000.00! I need to sell this body and all of the parts. It is a Briggs body.

40coupefan · 01-11-2014, 09:13 AM

Weekend bump!

aandtman · 01-12-2014, 06:13 PM

Who ever buys this, I have a very nice correct/clear frame, I might be able to deliver to Chickasha. Have other S/W sheet metal parts also.
As a side note, in addition to what Bill underwood said above, Briggs bodys were also identified buy a embossing located on the LH cowl, very bottom, just forward of the cowl band,hood must be opened. This car has the typical rust-out in that area. Murray had no markings in that area. Also, the insids of the doors just below the handles, a "B" was stamped in the metal.

40coupefan · 02-05-2014, 06:30 AM

Back up! I will make someone a deal!

11-18-2013, 10:11 PM	#1
40coupefan Member Join Date: Sep 2010 Location: Trumann, AR Posts: 38	1931 Murray Slant Window 4 Door Body City: Truman State: Arkansas Price: $2,700 1931 Murray slant window 4 door body (only) and all of the miscellaneous body parts shown. Fenders with splash aprons, new running boards, seat pan with all seat springs, front and rear bumpers with arms (bumper irons), top vinyl with padding, door scruff plates, new door handles (inside and out), door latches, window regulators, garnish moldings, gas tank, chrome windshield frame with glass, interior wood and top bows. I am not selling the frame, running gear, motor, transmission, radiator or grille shell. I am changing directions and going with a roadster body. 01 by Bib Overalls, on Flickr 02 by Bib Overalls, on Flickr 04 by Bib Overalls, on Flickr 06 by Bib Overalls, on Flickr Click here to see 20 additional high resolution photos. http://www.flickr.com/photos/ratpois...7637737844025/ PM if interested or call Larry at 870-483-3250. Thanks for looking!!

11-20-2013, 03:42 PM	#2
40coupefan Member Join Date: Sep 2010 Location: Trumann, AR Posts: 38	Re: 1931 Murray Slant Window 4 Door Body We incorrectly listed as Murray, car is actually a Briggs body. Guys I have a lot of parts that goes with the body!

11-20-2013, 06:42 PM	#3
C4engr Senior Member Join Date: Nov 2011 Location: San Jose CA Posts: 113	Re: 1931 Murray Slant Window 4 Door Body The body shown is a Murray.... The top part of the door window frame is curved.... Briggs window frames were straight.. Your original listing is correct... Roger

11-20-2013, 07:00 PM	#4
Bill Underwood Senior Member Join Date: May 2010 Location: Tennessee Posts: 445	Re: 1931 Murray Slant Window 4 Door Body Roger, your comment is correct as to non-slants; incorrect on slants.However, B & M slants are virtually the same. Small nuances such as rear valance, cage nuts vs d-nuts. Those woild be the litmus.

12-19-2013, 05:37 PM	#5
40coupefan Member Join Date: Sep 2010 Location: Trumann, AR Posts: 38	Re: 1931 Murray Slant Window 4 Door Body Thursday bump! $2200.00!

12-25-2013, 05:26 PM	#6
ialbel Junior Member Join Date: Jun 2011 Posts: 1	Re: 1931 Murray Slant Window 4 Door Body Sponsored Links (Register now to hide all advertisements) I need door hinges for my Victoria ...are your extras for sale?

12-26-2013, 07:22 PM	#7
Zmanx98 Junior Member Join Date: Dec 2013 Posts: 4	Re: 1931 Murray Slant Window 4 Door Body The body looks like a Murray, has it been determined which it is? I assume the ID plates are gone from the firewall? I have a body that is in bad shape on my Murray.

12-31-2013, 08:21 AM	#8
40coupefan Member Join Date: Sep 2010 Location: Trumann, AR Posts: 38	Re: 1931 Murray Slant Window 4 Door Body New Price $2000.00! I need to sell this body and all of the parts. It is a Briggs body.

01-11-2014, 09:13 AM	#9
40coupefan Member Join Date: Sep 2010 Location: Trumann, AR Posts: 38	Re: 1931 Murray Slant Window 4 Door Body Weekend bump!

01-12-2014, 06:13 PM	#10
aandtman Senior Member Join Date: Sep 2010 Location: Tucson Az Posts: 165	Re: 1931 Murray Slant Window 4 Door Body Who ever buys this, I have a very nice correct/clear frame, I might be able to deliver to Chickasha. Have other S/W sheet metal parts also. As a side note, in addition to what Bill underwood said above, Briggs bodys were also identified buy a embossing located on the LH cowl, very bottom, just forward of the cowl band,hood must be opened. This car has the typical rust-out in that area. Murray had no markings in that area. Also, the insids of the doors just below the handles, a "B" was stamped in the metal.

02-05-2014, 06:30 AM	#11
40coupefan Member Join Date: Sep 2010 Location: Trumann, AR Posts: 38	Re: 1931 Murray Slant Window 4 Door Body Back up! I will make someone a deal!