Gasket Display Board

[BRENT in 10-uh-C]

I think most of us have seen the gasket display boards offered back in the day by National Cork Gasket Co and other companies for the Model-Ts, but does anyone have an era board that was made for the Model-A's gaskets? If so, can you post a picture?
.
.

[1930artdeco]

If worst comes to worst how about making a pattern and selling them?

Mike

[gpits68]

IMG_20171008_062128528_HDR.jpgHere is a Model A gasket board I purchased this year.

[Gary in MN]

Here's a Model A one.

[BRENT in 10-uh-C]

Let me bring this back up to the top of the pile for a related question. For those that have one of these (either for an A or a T), how are the "pegs" attached to the board? Are the steel pegs threaded into the wood, -or are they inserted into a drilled hole and glued??

[mercman from oz]

Sponsored Links (Register now to hide all advertisements)

Very neat "NACO" Cork Gaskets for Fords - Display Board.

[stevests]

I have several different types for T's - the steel ones have a threaded bent hanger that attaches to the backside with a washer & small nut - I don't recall what my factory Ford T board has it's hooks applied - I look at it this a.m.

[BRENT in 10-uh-C]

Originally Posted by stevests

I have several different types for T's - the steel ones have a threaded bent hanger that attaches to the backside with a washer & small nut - I don't recall what my factory Ford T board has it's hooks applied - I look at it this a.m.

Please look for me. Thanks!!