Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-30-2019, 08:51 AM   #1
Pete Fl/Wi
Senior Member
 
Pete Fl/Wi's Avatar
 
Join Date: May 2010
Posts: 281
Default 1939 coupe project

The fun begins ###
I made a mistake on project it is a 38 coupe
Senior moment
Attached Images
File Type: jpg output(2).jpg (43.0 KB, 304 views)

Last edited by Pete Fl/Wi; 05-02-2019 at 06:28 PM.
Pete Fl/Wi is offline   Reply With Quote
Old 04-30-2019, 09:30 AM   #2
GaryU.
Senior Member
 
GaryU.'s Avatar
 
Join Date: May 2010
Location: Beaver Dam, Wisconsin
Posts: 821
Default Re: 1939 coupe project

Now we want to see more. Keep those pics coming please. Are you in Florida or Wisconsin for this endeavor?
GaryU. is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-30-2019, 09:41 AM   #3
Zeke3
Senior Member
 
Zeke3's Avatar
 
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,401
Default Re: 1939 coupe project

Doesn't look too bad. I still have not removed the 50 year old fiberglass/bondo repair on my 37 coupe to see what remains of the original panel. I can see a bunch of sheet metal screws on the inside from someone else's "repair" attempt. What shape is the tool compartment floor in? Mine won't hold water for sure.
Zeke3 is offline   Reply With Quote
Old 04-30-2019, 09:59 AM   #4
Pete Fl/Wi
Senior Member
 
Pete Fl/Wi's Avatar
 
Join Date: May 2010
Posts: 281
Default Re: 1939 coupe project

In Wisconsin for body and frame work. I will bring it to Florida next October for interior and wiring. Hope to have it on the road by next Christmas. Engine and trans are ready.
Attached Images
File Type: jpg 20180813_190252.jpg (98.4 KB, 270 views)
Pete Fl/Wi is offline   Reply With Quote
Old 04-30-2019, 11:09 AM   #5
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: 1939 coupe project

Just love those 39 & 40 coupes. That one looks better than a lot I've seen. It will take plenty of work but its worth every bit.
rotorwrench is offline   Reply With Quote
Old 05-01-2019, 06:24 AM   #6
corvette8n
Senior Member
 
corvette8n's Avatar
 
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,931
Default Re: 1939 coupe project

Sponsored Links (Register now to hide all advertisements)
Great looking motor.
corvette8n is offline   Reply With Quote
Old 05-01-2019, 05:31 PM   #7
40cpe
Senior Member
 
40cpe's Avatar
 
Join Date: May 2010
Location: Star, MS
Posts: 4,022
Default Re: 1939 coupe project

Is this the car you are re-working?
Attached Images
File Type: jpg '38std.jpg (47.0 KB, 217 views)
40cpe is offline   Reply With Quote
Old 05-01-2019, 06:49 PM   #8
Pete Fl/Wi
Senior Member
 
Pete Fl/Wi's Avatar
 
Join Date: May 2010
Posts: 281
Default Re: 1939 coupe project

Yes that is the car.
Pete
Pete Fl/Wi is offline   Reply With Quote
Old 05-01-2019, 07:46 PM   #9
KiWinUS
Senior Member
 
KiWinUS's Avatar
 
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,945
Default Re: 1939 coupe project

One of my favorite models Pete!
I love it!!!
Enjoy
Cheers
Tony
KiWinUS is offline   Reply With Quote
Old 05-01-2019, 08:34 PM   #10
40cpe
Senior Member
 
40cpe's Avatar
 
Join Date: May 2010
Location: Star, MS
Posts: 4,022
Default Re: 1939 coupe project

Quote:
Originally Posted by Pete Fl/Wi View Post
Yes that is the car.
Pete
Please let me know what you do to the frame to get the T5 in there. It might be a challenge to get that fan set-up in that car with the engine in the normal position.
40cpe is offline   Reply With Quote
Old 05-02-2019, 08:28 AM   #11
Pete Fl/Wi
Senior Member
 
Pete Fl/Wi's Avatar
 
Join Date: May 2010
Posts: 281
Default Re: 1939 coupe project

The frame showed signs of damage with decent repair and tube shocks but sat a little low on one side. knowing I was going with a t5 I decided to go with a aftermarket chassis. The plan is stock look,stock trim and wheels..
Before I get bumped off the Barn I want to give a shot out to Ol'Ron for introducing me to a Merc intake with Rochester 2g. I have used this setup on two other builds. Makes for a great setup for a mild flathead.
Attached Images
File Type: jpg 20180819_092529.jpg (83.0 KB, 206 views)
Pete Fl/Wi is offline   Reply With Quote
Old 05-02-2019, 09:45 AM   #12
40cpe
Senior Member
 
40cpe's Avatar
 
Join Date: May 2010
Location: Star, MS
Posts: 4,022
Default Re: 1939 coupe project

That is a good looking chassis. It should ride and handle great!
40cpe is offline   Reply With Quote
Old 05-02-2019, 02:19 PM   #13
G32
Senior Member
 
Join Date: May 2010
Posts: 258
Default Re: 1939 coupe project

Quote:
Originally Posted by 40cpe View Post
is this the car you are re-working?
'38std.jpg

This coupe is a 1938 standard.

Hope this picture shows-need practice.

Gene Tulsa
G32 is offline   Reply With Quote
Old 05-02-2019, 03:17 PM   #14
Pete Fl/Wi
Senior Member
 
Pete Fl/Wi's Avatar
 
Join Date: May 2010
Posts: 281
Default Re: 1939 coupe project

You are right. 1938 I have a mind block because of my 1939 PICKUP. Senior citizen!!!
Second time you got me. Thanks
Attached Images
File Type: jpg DSC00512.jpg (68.1 KB, 50 views)
Pete Fl/Wi is offline   Reply With Quote
Old 05-02-2019, 05:58 PM   #15
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: 1939 coupe project

The 38 standard is still a nice car.
rotorwrench is offline   Reply With Quote
Old 05-02-2019, 06:53 PM   #16
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: 1939 coupe project

I love the looks of the 38 std!
JSeery is offline   Reply With Quote
Old 05-04-2019, 08:25 AM   #17
Ben38
Member
 
Ben38's Avatar
 
Join Date: May 2010
Location: Apple Valley, MN
Posts: 61
Default Re: 1939 coupe project

Me too!
Ben38 is offline   Reply With Quote
Old 05-04-2019, 08:44 AM   #18
sidevalve8ba
Senior Member
 
sidevalve8ba's Avatar
 
Join Date: May 2013
Location: Harrisonburg, VA
Posts: 840
Default Re: 1939 coupe project

'38 Standard is one of my favorites, too. Especially the coupes.
sidevalve8ba is offline   Reply With Quote
Old 09-04-2019, 07:01 PM   #19
Pete Fl/Wi
Senior Member
 
Pete Fl/Wi's Avatar
 
Join Date: May 2010
Posts: 281
Default Re: 1938 coupe project

Some build pictures. Hope to have it done by mid October.
Attached Images
File Type: jpg IMG_0349.jpg (125.9 KB, 110 views)
File Type: jpg IMG_0351.jpg (152.3 KB, 132 views)
File Type: jpg IMG_0350.jpg (132.7 KB, 119 views)
File Type: jpg IMG_0348.jpg (137.4 KB, 110 views)
Pete Fl/Wi is offline   Reply With Quote
Old 09-04-2019, 07:15 PM   #20
RKS.PA
Senior Member
 
RKS.PA's Avatar
 
Join Date: Jun 2010
Location: Marana, AZ
Posts: 1,192
Default Re: 1939 coupe project

Pete, that is going to be one awesome coupe. Love that dash, steering wheel and seat!!
RKS.PA is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:51 AM.