Re: How to: Jet flow test?
I see a problem with the setup as per post 17 by rockhillwill. The jet is attached to a length of tube which is then lowered into the collection beaker. The jet must be kept in a horizontal position to maintain the 36" or 37 1/4" (whichever you are using) Lowering the jet as shown in the picture will effectively increase the head pressure an will not give an accurate reading. The post by 160B (post 16) and Tom Endys post 20 shows the correct setup for holding the jets at the correct position.
__________________
Adjust your points with gentle blows of a 2 pound hammer
Last edited by RUNNERBUN; 01-15-2015 at 08:40 PM.
Reason: extra info
|