|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-01-2021, 02:55 PM | #1 |
Senior Member
Join Date: May 2010
Location: san diego
Posts: 518
|
Napa part number for 41 fan belt
Can anyone tell me what the Napa part number is for a fan belt for a 41 ford coupe? Stock pulleys,6 V 42 generator. I have one from C&G it’s V shaped with ridges.
__________________
"I have built my organisation on fear"..Al Capone. |
02-01-2021, 03:13 PM | #2 | |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Napa part number for 41 fan belt
Quote:
Don't know what you mean by "V shaped with ridges" The belts are supposed to be 'V' shaped and some have relief grooves. The belt should be 54 3/8"long x5/8" wide. Check Napaonline.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
|
Sponsored Links (Register now to hide all advertisements) |
|
02-02-2021, 08:10 AM | #3 |
Senior Member
Join Date: Dec 2020
Location: Pt. St. Lucie, FL
Posts: 104
|
Re: Napa part number for 41 fan belt
Not sure if it's the same as my '35 = NAPA B54. It's 56 3/4" long.
|
02-02-2021, 01:51 PM | #4 |
Senior Member
Join Date: Dec 2012
Location: Massillon, Ohio
Posts: 783
|
Re: Napa part number for 41 fan belt
I have a DAYCO No. 22528 belt on my '41. It fits perfect and has been on for 7 years now.
|
02-02-2021, 01:54 PM | #5 |
Senior Member
Join Date: May 2010
Location: San Tan Valley, Arizona
Posts: 210
|
Re: Napa part number for 41 fan belt
I forget who this came from, somebody here on the Barn nice enough to share it.
__________________
Wayne |
02-02-2021, 01:59 PM | #6 |
Senior Member
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,040
|
Re: Napa part number for 41 fan belt
|
02-02-2021, 02:20 PM | #7 |
Senior Member
Join Date: Aug 2018
Location: Ottawa, ON
Posts: 850
|
Re: Napa part number for 41 fan belt
Not sure if the 41 belt arrangement is the same as I have for my C59A, but for the crank/water pump/ generator belt I went with the Gates B54/55 belt. My crank pulley is no good so I can’t fit it onto the crankshaft to get an exact fit, but I think either will work with the generator adjustment range.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|