Cabriolet 68B wood subframe and possibly boatail speedster.

[Sckxyss]

Hello
There's not very much left of my 1930 cabriolet subframe, i have the two wood channels who can be used as templates but only bits of the siderails.


Someone can provide me the drawing of these parts? And i dream to build a boatail speedster and have the cowl of a roadster to start. I can make two cabriolet subframe and use one for the speedster.


Best regards.

[1930artdeco]

I think Ford A wood sells them.


Mike

[larrys40]

If you need subframe wood let me know . I have an extra set very reasonable.
Larry

[BRENT in 10-uh-C]

Originally Posted by Sckxyss

Hello
There's not very much left of my 1930 cabriolet subframe, i have the two wood channels who can be used as templates but only bits of the siderails.


Someone can provide me the drawing of these parts? And i dream to build a boatail speedster and have the cowl of a roadster to start. I can make two cabriolet subframe and use one for the speedster.


Best regards.

The prints are available at the Benson Library. The Assy. drawings would be A-70054-* and 70055-*. You would then need to list all of the component pieces and pull the prints on those. I will tell you though, they are very difficult to read because it lists everything by sweeps and radii.

[77Birdman]

I looked up those prints, they are fantastic! I guess im geeky that way in I love technical drawings. It makes me want to get in the shop and start milling stuff out just because.

[Sckxyss]

Sponsored Links (Register now to hide all advertisements)

Someone can send me the link, i can't found it.
At least i found a nice picture.

[ronn]

the 2 sills sell for around 1300. at Snyders or Cubel



I cut a couple of them out and have sold them to fellow cab owners.


they are not a big deal if you have a template.