The Ford Barn

Albany Tom · 04-13-2020, 07:46 AM

I was searching the Ford Barn for how to repair the steering-wheel horn switch on a 1930-31 Model A Ford.

I found a helpful blog post from 2006 on the subject and wanted to help the Ford Barn community by linking to it here. As you never know when these old blogs will be shut down, I copied the information from the blog to a public Google document.

Here's the link:

https://docs.google.com/document/d/1...it?usp=sharing

Werner · 04-13-2020, 02:25 PM

Tom, that's a pretty idea, thanks!

katy · 04-14-2020, 11:44 AM

Sponsored Links (Register now to hide all advertisements)

When I repaired the horn button section of the horn/light switch control rod, the 4 tabs had been straightened and rebent previously so they broke off for me. I couldn't find that piece available separately so I just soldered the 4 points to keep it together.

04-13-2020, 07:46 AM	#1
Albany Tom Junior Member Join Date: Jun 2019 Location: Albany, NY Posts: 10	1930 Model A Ford horn switch repair I was searching the Ford Barn for how to repair the steering-wheel horn switch on a 1930-31 Model A Ford. I found a helpful blog post from 2006 on the subject and wanted to help the Ford Barn community by linking to it here. As you never know when these old blogs will be shut down, I copied the information from the blog to a public Google document. Here's the link: https://docs.google.com/document/d/1...it?usp=sharing Last edited by Albany Tom; 04-13-2020 at 08:09 AM.

04-13-2020, 02:25 PM	#2
Werner Senior Member Join Date: Jan 2019 Location: Germany, near Aachen Posts: 1,153	Re: 1930 Model A Ford horn switch repair Tom, that's a pretty idea, thanks! __________________ Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version

04-14-2020, 11:44 AM	#3
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,042	Re: 1930 Model A Ford horn switch repair Sponsored Links (Register now to hide all advertisements) When I repaired the horn button section of the horn/light switch control rod, the 4 tabs had been straightened and rebent previously so they broke off for me. I couldn't find that piece available separately so I just soldered the 4 points to keep it together. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!