|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-12-2023, 03:17 PM | #1 |
Senior Member
Join Date: Aug 2010
Location: Blenheim, New Zealand
Posts: 879
|
Ford Laboratory Test Set Parts
I Have placed a request in the Swap Meet section but would like to cover all bases.
I am looking for parts to restore my 1938 Ford (Heyer) Laboratory Test Set. I purchased this some years ago and need some pieces to get it functional again. Primarily I need the "Interrupter & Gen Control Rheostat" and its knob. I would consider buying a complete unit if in the South California area close to my shipping agent as I will have to ship it to New Zealand. Any leads or help would be greatly appreciated, TIA.
__________________
I need an 01A 1453 Brkt Spare wheel hold down for my sedan delivery - PLEASE HELP Gotta love my '42 Sedan Delivery's - Now that I own the only two in New Zealand http://www.fordbarn.com/forum/album.php?albumid=580 |
01-12-2023, 04:16 PM | #2 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,376
|
Re: Ford Laboratory Test Set Parts
Ford Laboratory Test Set. meric42 needs help to get his looking like this one. |
Sponsored Links (Register now to hide all advertisements) |
|
01-12-2023, 04:24 PM | #3 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,376
|
Re: Ford Laboratory Test Set Parts
Laboratory Tests For Ford Cars - 1937 Manual |
01-12-2023, 04:28 PM | #4 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,376
|
Re: Ford Laboratory Test Set Parts
Laboratory Tests for Ford Cars - 1938 Manual |
01-12-2023, 04:32 PM | #5 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,376
|
Re: Ford Laboratory Test Set Parts
Close up of instruments on the top of the Ford Laboratory Test Set. |
01-12-2023, 05:18 PM | #6 |
Senior Member
Join Date: Aug 2010
Location: Blenheim, New Zealand
Posts: 879
|
Re: Ford Laboratory Test Set Parts
Sponsored Links (Register now to hide all advertisements)
__________________
I need an 01A 1453 Brkt Spare wheel hold down for my sedan delivery - PLEASE HELP Gotta love my '42 Sedan Delivery's - Now that I own the only two in New Zealand http://www.fordbarn.com/forum/album.php?albumid=580 |
01-13-2023, 03:09 PM | #7 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,942
|
Re: Ford Laboratory Test Set Parts
That is really an amazing artifact! I'm sure it would also be extremely useful to guys like us.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
01-14-2023, 08:04 AM | #8 |
Senior Member
Join Date: May 2010
Posts: 4,751
|
Re: Ford Laboratory Test Set Parts
The books above are not by Heyer or Ford. But they can be useful. Heyer operating instructions are printed on cards that are under the side cover of the machine. Ford operating instructions are in the Ford Service bulletins. Parts will be hard to find original except for the electrical gauge on the front. The Heyer machine is not as good in operation as a Sun or others. It uses a carbon pile for adjustment of RPM of the motor when the carbon heats up the adjustment changes and require constant readjustment, plus the Heyer uses car type 6V batteries and not 120Vac. You may have to use more modern replacement parts with the same original values as what you are replacing. Unless you can find someone willing to strip components from another Heyer.
|
01-14-2023, 09:35 AM | #9 |
Senior Member
Join Date: May 2010
Location: Liberty, KY
Posts: 901
|
Re: Ford Laboratory Test Set Parts
This one have anything you can use? https://www.ebay.com/itm/163925693094
|
01-14-2023, 01:55 PM | #10 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,578
|
Re: Ford Laboratory Test Set Parts
GB, that machine would be useless to "guys like us" as I see in the operators manual you need to wear a suit and tie while performing the tests.
|
01-14-2023, 08:38 PM | #11 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,942
|
Re: Ford Laboratory Test Set Parts
Got me a union suit. What else would a guy wear under his coveralls?, but what is a 'tie'?
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
01-15-2023, 05:55 PM | #12 | |
Senior Member
Join Date: Aug 2010
Location: Blenheim, New Zealand
Posts: 879
|
Re: Ford Laboratory Test Set Parts
Quote:
Terry mentions the carbon pile adjustment above and since mine is missing that part I have no way of knowing the value of it. If I could find it's value then I could possibly find a suitable replacement, but I have yet to find a circuit diagram to be able to work out a replacement option. I do have a background in electronics so could possibly modify it if I had more information on the necessary specifications of the original carbon stack part. Any and all input greatly appreciated
__________________
I need an 01A 1453 Brkt Spare wheel hold down for my sedan delivery - PLEASE HELP Gotta love my '42 Sedan Delivery's - Now that I own the only two in New Zealand http://www.fordbarn.com/forum/album.php?albumid=580 |
|
01-15-2023, 07:10 PM | #13 | |
Senior Member
Join Date: Aug 2010
Location: Blenheim, New Zealand
Posts: 879
|
Re: Ford Laboratory Test Set Parts
Quote:
__________________
I need an 01A 1453 Brkt Spare wheel hold down for my sedan delivery - PLEASE HELP Gotta love my '42 Sedan Delivery's - Now that I own the only two in New Zealand http://www.fordbarn.com/forum/album.php?albumid=580 |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|