Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-14-2020, 04:43 PM   #1
njmazzarella
Junior Member
 
Join Date: Jun 2018
Posts: 4
Default 31 SW 4 door Windshield/Tank Trim

My 31 4 door SW trim piece between the windshield and tank top is badly rusted. I want to remove it. I removed the two side screws and all tank to dash rail bolts except the two side bolts along the top of the cowls on either side. Do those bolts have to come out? I really don't want to pull the tank if I don't need to.
Nick in Illinois
njmazzarella is offline   Reply With Quote
Old 03-14-2020, 06:33 PM   #2
burner31
Senior Member
 
burner31's Avatar
 
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 2,879
Default Re: 31 SW 4 door Windshield/Tank Trim

Sponsored Links (Register now to hide all advertisements)
No, those should come out with some wiggling, they are a pain in the ass to get in and out, but they do come out.
__________________
Keith
Shawnee OK
'31 SW 160-B
burner31 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:24 AM.