Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-27-2020, 08:37 PM   #1
speedbug78
Junior Member
 
Join Date: Jul 2020
Posts: 2
Default Unorthodox 8ba

I talked to an old racer once about building flow restricted engines. His philosophy was to maximize pumping action of the engine to draw as much as possible through the restriction.


In that vein, getting the piston to dwell at the bottom and maximizing bore/stroke would seem to help.


From the outside it looks like someone could install large sleeves in a flathead block and run as much as a 3.75" bore or so. This requires moving some head bolts and water passages. They were doing things like this quite a while back as I'm sure some of you already know.
http://351c.net/wiki/Magazine%20Arti...zingblocks.pdf


I'm coming from the position of 1/4 mile performance.


What do we run into stroke wise? Camshaft clearance?
speedbug78 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:41 PM.